manualshive.com logo in svg

Bosch PRAESENSA PRA-AD604, Configuration Manual, Page: 127 / 164

Share
Download
Bosch PRAESENSA PRA-AD604 Configuration Manual Download Page 127

PRAESENSA

Optional: Using the Logging Viewer | en

127

Bosch Security Systems B.V.

Configuration manual

2020-09 | V1.20 | PRAESENSA 1.20

Systems

The items in the System menu are used to select the system from which the events are
displayed. The list of available systems is generated by the Logging Server to which the
Logging Viewer is connected. When All is selected, the events from all systems are displayed,
including events from disabled systems and events from non-configured systems. Events
generated by the Logging Server itself can be selected separately.

Action

The items in the Action menu are used to acknowledge and reset fault events. It contains the
following items:
–

Acknowledge All Fault Events: Acknowledges all new fault events in all systems that are
connected to the Logging Server. The user must log on to the Logging Server to
acknowledge fault events.

–

Reset All Fault Events: Resets all acknowledged fault events in all systems that are
connected to the Logging Server. The user must log on to the Logging Server to reset
fault events.

–

Log Off: Logs the user off from the Logging Server.

Help

The item in the Help menu provides version information about the Logging Viewer.

12.3.2

Logging status button

The Logging Status window displays the status of the Logging Viewer. The following messages
could be displayed:

Message

:

The Logging Server and Viewer are OK.

Description

:

The Logging Server and Logging Viewer operate correctly.

Recommended action

:

----

Message

:

Logging Server has no connection with <system>.

Description

:

There is no connection with the specified system.

Recommended action

:

Make sure that the specified system is running and that the specified system has an Ethernet
connection with the Logging Server.

Message

:

The Logging Viewer has lost contact with the Logging Server.

Description

:

There is no connection with the Logging Server.

Recommended action

:

Make sure that the Logging Server is running and that the Logging Server has an Ethernet
connection with the Logging Viewer.

Summary of Contents for PRAESENSA PRA-AD604





































































































































































Reviews:

No comments