12
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š
.
All the hotplates have this function.
To activate
The hob must be switched on, but no hotplate should be
working.
1.
Select the required hotplate.
2.
Select the power level
Š
.
3.
Then press the + symbol.
The
›
symbol lights up in the display. The powerboost
function has been activated.
Note:
If any hotplate is switched on when the Powerboost
function is working,
›
and
Š
will flash on the hotplate display;
the power level
Š
will then be set. The Powerboost function will
be deactivated.
To turn off
Select the hotplate and press the - symbol. The
›
indicator will
no longer be displayed and the hotplate will return to the power
level
Š
. The Powerboost function has been deactivated.
Note:
In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time program function
This function allows the selected hotplate to be switched off
automatically after a preset time by inserting the cooking time.
How to program
The hob should be switched on.
1.
Select the required hotplate and power level.
Then press the
r
symbol until the
‹‹
indicator is displayed.
The indicator lights up on the selected hotplate.
2.
Set the time using the
+
or
-
symbols.
+
= 30 minutes
-
= 10 minutes
After a few seconds, the timer will start to count down.
Once the time has elapsed
The hotplate turns off, there is a warning sound and the
‹
indicator lights up. Press the
r
symbol. The indicators go out
and the sound stops.
To cancel or change the time
Select the hotplate with the
μ
symbol. Press the
r
symbol
and change the cooking time with the
+
or
- ,
symbols or
set to
‹‹
.
Note:
Any cooking time can be programmed up to 99 minutes.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
™‚
Childproof lock
‹
Deactivated.*
‚
Activated.
*Factory settings
**The maximum power of the hob depends on the configuration of the installation's connection current. To not exceed this maximum
value, the hob includes a series of components that automatically control the power, distributing it between the hotplates in use
as required.
