13
Changing or cancelling the time
Press the
0
symbol. Change the time by pressing the
0
to
9
symbols or
+
and
-
symbols. To cancel the time, programme it
to
0
with the
0
to
9
symbols or with the
+
and
-
symbols.
Note:
When the
°
symbol is pressed and the time has not been
set, an alert will appear on the display.
Once the time has elapsed
Once the time has elapsed a beep will sound. 00:00 appears
in the time program function display. When the
0
symbol is
pressed, the displays turn off and the beep goes off.
Cleaning lock
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
>D
symbol. An alert will appear on the display. The
control panel is locked for 20 seconds. The surface of the
control panel can now be cleaned without risk of changing the
settings.
Note:
The lock does not affect the main switch. The hob may
be switched off when desired.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. F8
and the residual heat
indicator
q
H/
p
h flash alternately on the hotplate display.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Settings
The device has several basic settings. These settings can be
changed.
Indicator
Function
Language
English*
German
French
Dutch
Italian
Portuguese
Spanish
Danish
Swedish
Norwegian
Finnish
Russian
Polish
Turkish
Greek
Power levels
Š
‚ˆ
*
Beep
On*
Off
Power limit
from 1000 W to 9500 W.
Increasing the setting increases the power of the hob by 500 W.
*Basic settings
Saving some settings takes time. The
Y
symbol will appear on the display.
