4
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2
.
The control panel
Controls
When you touch a symbol, the respective function is activated.
Notes
■
The settings will remain unchanged if you touch several
symbols at once. This allows you to wipe up spills on the
control panel.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
•
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to
œ
. The display remains lit until the hotplate has
cooled sufficiently.
Power cut
If there has been a power cut, the residual heat indicator
switches back on automatically. The indicator flashes for
approximately 30 minutes. The flashing stops if you briefly
switch the hotplate on again.
&RQWUROIRU
Í
GXDOFLUFXLWKRWSODWH
'LVSOD\VIRU
³
É
KHDWVHWWLQJ
¤
UHVLGXDOKHDW
©
HOHFWURQLFERLOVWDUWFRQWURO
&RQWUROIRU
,
FKLOGSURRIORFN
&RQWUROV
DQGGLVSOD\VIRU
WKHWLPHU
&RQWUROIRU
p
H[WHQGHGFRRNLQJ]RQH
Hotplate
Activating and deactivating
$
Single-circuit hotplate
ð
Dual-circuit hotplate
Touch the
ñ
symbol
æ
Extended cooking zone
Touch the
é
symbol
When the hotplate is activated: the corresponding indicator lights up.
When the hotplate is switched on: the last selected size is automatically selected again
