Bosch NKC8 17 Series, Instruction Manual

Page: 9 / 16

9
Timer
The timer can be used in two different ways:
■
To switch a hotplate off automatically
■
As a kitchen timer
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time:
1.
Set the heat setting for the hotplate.
2.
Within the next 10 seconds, touch the 0 symbol. ‹‹ lights
up on the timer display. The x indicator for the desired
hotplate lights up.
3.
Touch the
+
or
-
symbol. The default value appears.
+
symbol: 30 minutes
-
symbol: 10 minutes
4.
Touch the
+
or
-
symbol until the desired cooking time
appears on the timer display.
The cooking time counts down. If you have set a cooking time
for several hotplates, you can display each cooking time. To do
this, touch the 0 symbol repeatedly until the x indicator
lights up brightly for the desired hotplate.
When the time has elapsed
When the cooking time has elapsed, the hotplate switches off.
‹ flashes in the hotplate display. An audible signal sounds. ‹‹
lights up in the timer display for 10 seconds. Turn the burner
control off.
Changing or cancelling the cooking time
Touch the 0 symbol repeatedly until the x indicator for the
desired hotplate lights up brightly. Use the
+
or
-
symbol to
change the cooking time or to set to ‹‹ .
Note:
You can set a cooking time of up to 99 minutes.
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note:
You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Touch the 0 symbol repeatedly until the x indicator for the
hotplate lights up brightly. Change the cooking time with the
+
or
-
symbol or set to ‹‹ .
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Setting the time:
1.
Touch the 0 symbol repeatedly until the V indicator lights
up. ‹‹ lights up on the timer display.
2.
Touch the
+
or
-
symbol. The default value appears.
+
symbol: 10 minutes
-
symbol: 05 minutes
3.
Touch the
+
or
-
symbol until the desired time appears on the
timer display.
The time counts down.
An audible signal sounds once the time has elapsed.
‹‹ lights
up in the timer display for 10 seconds.
Displaying the time
Use the 0 symbol to select the kitchen timer. The time is
displayed for 10 seconds.
Changing the time
Use the 0 symbol to select the kitchen timer and reset the
time.
Automatic time limit
If a hotplate has been switched on for a long time without the
setting being changed, the automatic time limit is activated.
The hotplate stops heating.
” ‰ and the • / œ residual heat
indicator flash alternately on the hotplate display.
Switch off the hotplate.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Note:
You can switch the hotplate back on again at any time.
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered.
Your hob has a wipe protection function to avoid this. Touch the
- symbol. A signal sounds and the indicator light above the -
symbol lights up. The control panel is locked for 30 seconds.
You can now wipe over the control panel without altering any
settings.