Basic operation
en
47
Tips
¡
You can change the speed at any
time during processing or interrupt
processing.
¡
Clean all parts immediately after
use so that residues do not dry on.
Adding more ingredients
1.
To add ingredients during pro-
cessing, use the filling shaft in the
lid.
→ Fig.
2.
To add large quantities, set the
rotary switch to
.
Wait until the appliance stops.
3.
Remove the bowl lid.
→
4.
Add the ingredients to the bowl.
5.
Attach the bowl lid.
→
6.
Process the ingredients until you
achieve the required result.
Using instantaneous switching
1.
Set the rotary switch to and
hold.
→ Fig.
a
The ingredients are processed at
maximum speed.
2.
Release the rotary switch.
→ Fig.
a
The rotary switch springs to
.
a
Processing stops and the drives
move to the parked position.
Tip
Instantaneous switching is especially
suitable when using the following
accessories:
¡
Glass blender attachment
¡
Multi-chopper set
¡
Multi-blender attachment
Drive cover
Remove the protective cover to use
accessories on drive 2 or 3.
Removing drive cover
1.
Press down the protective cover
for drive 2 at the marking
and
remove.
→ Fig.
2.
Pull up the protective cover for
drive 3 and remove.
→ Fig.
Fitting drive cover
1.
Align the protective cover for
drive 2 with the marking
to-
wards the back, position and press
in place firmly.
→ Fig.
2.
Position the protective cover for
drive 3 and press in place firmly.
→ Fig.
Markings
and
must match
up.
Note:
Always close unused drives
with the protective covers.
Fine adjustment of tools
Use the fine adjustment system to
correct the distance between the
bowl and the professional beating
whisk.
Note:
The professional beating whisk
is factory-set so that ingredients are
mixed together perfectly.
Correcting tool adjustment
ATTENTION!
The appliance and tools can be dam-
aged if a wrong tool setting is used.
▶
Never operate a tool that touches
the bowl.
Requirements
¡
The mains plug is pulled out.
¡
The swivel arm is open.
¡
The professional beating whisk is
inserted.
¡
The bowl has been inserted.
