20
en
Safety systems
Safety systems
Start lock-out
See “Operating positions” table.
The appliance can be switched on in
pos.
1
and
3
only:
■ when the bowl (10) has been inserted and
turned until it locks into place
and
■ the blender drive cover has been
attached (7).
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does
not start running again when the power
is restored. To switch the appliance on
again, turn the rotary switch to
P
, then
switch on.
Overload protection
If the motor switches itself off while the appli-
ance is being used, the overload protection
feature has been activated. A possible cause
may be that too much food was processed at
one time.
If a safety system is activated, see
“Troubleshooting”.
The operating instructions describe several
models, see also overview of models
(Fig.
M
)
. The appliance requires no
maintenance.
Overview
Please fold out the illustrated pages.
Fig.
A
:
Base unit
1 Release button
2 Swivel arm
“Easy Armlift” function to support the
upward movement of the arm (see “Work
positions”).
3 Rotary switch
When the appliance has been switched
off (position
P
), the appliance runs
automatically to the optimum position for
changing the tools.
P
= Stop
M
= Instantaneous switching at
maximum speed, hold switch for required
blending duration.
Settings
1-4
, Operating speed:
1
= low speed – slow,
4
= high speed – fast.
4 Drive cover
To remove the drive cover, press on the
rear area and remove cover.
5 Drive for
–
Continuous-feed shredder
and
–
Citrus press
(optional accessory*).
When not in use, attach the drive cover.
6 Drive for tools
(stirrer, whisk, kneading
hook)
and mincer
(optional accessory*)
7 Blender drive cover
8 Drive for blender
(optional accessory*)
When not in use, attach the blender drive
cover.
9 Cord store
Stow the cord in the cord store
Bowl with accessories
10 Stainless steel stirring bowl
11 Lid
Tools
12 Stirrer
13 Whisk
14
Kneading hook with dough deflector
15 Accessories bag
For storage of the tools and cutting discs.
