Bosch MUM 54920GB, Operating Instruction, Page: 33 / 65

Robert Bosch Hausgeräte GmbH 33
Bowl and tools
Attention!
Use bowl with this appliance only.
Stirrer (13)
for stirring dough, e.g. cake mixture
Whisk (14)
for whisking egg whites, cream and
light dough, e.g. sponge mixture
Kneading hook (15)
for kneading heavy dough and mixing-
in ingredients that ought not be cut
(e.g. raisins and chocolate chips)
Working with the bowl and the tools Fig.


Press the Release button and move
the swivel arm to position 2.

Insert the bowl:
– Tilt the bowl forwards and then set it
down.
– Turn anti-clockwise until it locks into
place.

Depending on the processing task, insert
the stirrer, whisk or kneading hook until it
locks into position.
Note:
If using the kneading hook, rotate the
dough deflector until the kneading hook
can lock into position (
Fig.

–
4b
).

Put the ingredients to be processed into
the bowl.

Press the Release button and move
the swivel arm to position 1.

Attach the cover.

Set the rotary switch to the desired
setting.
Our recommendation:
– Stirrer:
first stir in at setting 1 (1), then select
setting 7 (4)
– Whisk:
setting 7 (4), mix in at setting 1 (1)
– Kneading hook:
first stir in at setting 1 (1), knead at setting
3 (2)
Adding more ingredients

Switch off the appliance with the rotary
switch.

add more ingredients through the feed
tube in the cover.
çê

Remove lid.

Press the Release button and move
the swivel arm to position 2.

Add ingredients.
After using the appliance

Switch off the appliance with the rotary
switch.

Remove mains plug.

Remove lid.

Press the Release button and move
the swivel arm to position 2.

Take the tool out of the drive.

Remove the bowl.

Clean all parts, see “Cleaning and
servicing”.
Continuous-feed shredder
Warning!
The continuous-feed shredder must be
completely assembled before use. Never
assemble the continuous-feed shredder on
the base unit.
Operate the continuous-feed shredder in the
indicated operating position only.
en
Risk of injury from rotating tools
While the appliance is operating, never
place fingers in the mixing bowl. Attach the
cover (12) before operating the appliance!
Do not change tools until the drive has
come to a standstill – when the appliance
is switched off, the drive continues running
briefly and stops in the tool change
position. Do not move the swivel arm until
the tool has come to a standstill.
For reasons of safety the appliance may
only be operated when unused drives have
been covered with drive guards (5, 8).
Risk of injury
Do not grip the sharp blades or edges of
the cutting discs. Take hold of cutting
discs by the edge only.
Before attaching/removing the continuous-
feed shredder, wait until the drive has
come to a standstill and pull out the mains
plug.
Do not reach into the feed tube.