Bosch MUM 54920GB, Operating Instruction, Page: 30 / 65

30 Robert Bosch Hausgeräte GmbH
Risk of injury from sharp blades!
Do not grip the sharp blades or edges of the cutting discs. Take hold
of cutting discs by the edge only.
Do not touch blender blades with bare hands.
Risk of injury from sharp blades/rotating drive!
Never place fingers in the attached blender! Do not remove/attach the
blender until the drive is at a standstill! Operate the assembled blender
only and with the lid attached.
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0,5 litres of hot or frothing liquid.
Important!
Use the appliance with original accessories only. When using the
accessories, follow the enclosed operating instructions.
Use only one tool or accessory at any one time.
,
Explanation of the symbols on the appliance or accessory
Follow the instructions in the operating instructions.
Caution! Rotating blades.
Caution! Rotating tools.
Do not place fingers in the feed tube.
Safety systems
Start lock-out
See “Operating positions” table.
The appliance can be switched on in pos. 1
and 3 only:
– when the bowl (11) has been inserted and
turned until it locks into place and
– the blender drive cover has been
attached (8).
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does not
start running again when the power is
restored. To switch the appliance on again,
turn the rotary switch to 0/off, then switch on.
Overload protection
If the motor switches itself off while the
appliance is being used, the overload
protection feature has been activated. A
possible cause may be that too much food
was processed at one time.
If a safety system is activated, see
“Troubleshooting”.
en