Bosch MSK030B-0900-NN Project Planning Manual Download

Page: 210 / 282

9.3

Design and installation positions

Motor design B05

IM B5

IM V1

IM V3

IM B35

Flange attachment on

the drive side of the

flange

Flange attachment on

the drive side of the

flange, drive side fac‐

ing down

Flange attachment on

the drive side of the

flange, drive side fac‐

ing up

Flange attachment on

the drive side of the

flange or foot attach‐

ment

Tab. 9-7:

Permissible conditions of installation according to EN 60034-7:1993

Motor damage due to penetration of liquids!

NOTICE

If motors are attached according to IM V3, fluid present at the output shaft

over a prolonged time may penetrate and cause damage to the motors.
Ensure that fluid cannot be present at the output shaft.

Foot assembly

In contrast to flange assembly, radial forces may only be effective in a direc‐

tion perpendicular to the mounting surface (± 15°) if foot assembly is selec‐

ted. The transmission of forces in other effective directions is not allowed.

①

Mounting feet

Fig. 9-3:

Foot assembly

Bosch Rexroth AG

DOK-MOTOR*-MSK********-PR12-EN-P

208/279

Synchronous Servomotors MSK

Operating conditions and application notes

Summary of Contents for MSK030B-0900-NN



























































































































































































































































































Search results

Summary of Contents for MSK030B-0900-NN

Reviews:

Related manuals for MSK030B-0900-NN

Brands by name

Popular brands

Bosch MSK030B-0900-NN, Project Planning Manual

Search results

Summary of Contents for MSK030B-0900-NN

Reviews:

Related manuals for MSK030B-0900-NN

Brands by name

Popular brands