Bosch MIC IP starlight 7000i User Manual Download Page 37 | Manualshive

Page: 37 / 86

background image

AUTODOME IP starlight 7000i

Camera | en

37

Bosch Security Systems

User Manual

2020-07 | v0.7 |

To define a Custom tour

1.

Create the individual pre-positions.

2.

To add a pre-position into the custom tour, select the pre-position from the general list
and click the triangle button to copy it to the custom tour list.

3.

Adjust the custom tour sequence by moving preposition up or down.

4.

Select a dwell time from the drop-down list

Custom tour

.

5.

To start the

Custom tour

:

Return to the

Live

page.

Select

Special Functions

.

Click

AUX Control

.

Type 7 in the input box and click

AUX on

.

6.

To stop the tour, type 7 and click

AUX off

.

Sequence settings

Include in standard tour (marked with *)

Select this checkbox to include the pre-position in the standard tour.

Upload

Click the button to upload the tour configuration to the camera.

Dwell times

Standard pre-position tour

Select the dwell time in seconds or minutes for the

Standard pre-position tour

.

Custom pre-position tour

Select the dwell time in seconds or minutes for the

Custom pre-position tour

.

5.11

Pre-position settings

Pre-position

Select the number of the pre-position for which to save specific settings.

Name

Change the name of the pre-position if needed. Click

Set

to save the new name.

Automatic exposure

Select the automatic exposure mode. Options are Full-screen or Defined

Full-screen (Default)

The camera computes the lighting condition of the entire scene. Then the camera determines
the optimum level of iris, gain, and shutter speed.

Defined

Move and adjust the size of the green box to cover an interesting area.
The camera computes the lighting condition to the center spot of the specified area. Then the
camera determines the optimum level of iris, gain, and shutter speed to get an image.

Note

: the size shape of the specified area does not matter.

Day near limit [m]

Select the distance (in meters), from 0.1 to 20 m, for the minimum distance of the zoom focus
during the day.

«
...
35
36
37
38
39
...
»

Summary of Contents for MIC IP starlight 7000i























































































Reviews:

No comments

Related manuals for MIC IP starlight 7000i

Brand: Samsung Pages: 134

Brand: Idis Pages: 12

Brand: Idis Pages: 20

Brand: P3 International Pages: 3

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 104

Lumix DMC-GH2EB

Brand: Panasonic Pages: 200

Brand: Panasonic Pages: 82

Brand: Omron Pages: 2

8461444 - Max Flash Camera One Time Use

Brand: Kodak Pages: 2

FinePix FinePix J12

Brand: FujiFilm Pages: 213

Brand: Speco Pages: 10

Brand: Casio Pages: 53

e.Frame C/E Series

Brand: Forenex Pages: 20

Brand: Ultrak Pages: 36

Brand: ZENEC Pages: 2

Brand: PCO.IMAGING Pages: 44

ALIBI ALI-NS2112VR

Brand: Observint Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands