34
en | Camera
AUTODOME IP starlight 7000i
2020-07 | v0.7 |
User Manual
Bosch Security Systems
Iris
Auto iris
Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type
of lens is recommended for use where there are low light or changing light conditions.
–
Constant
(default): camera constantly adjusts to varying light conditions (default).
If you select this option, the camera makes the following changes automatically:
–
Gain Control
: switches to AGC.
–
Shutter Speed
: switches to default.
–
Manual
: camera must be manually adjusted to compensate for varying light conditions.
Auto iris level
Increases or decreases brightness according to the amount of light. Type a value between 1
and 15.
Zoom
Maximum zoom speed
Controls the zoom speed.
Zoom limit
Select the appropriate limit for zooming the camera: 20x, 30x.
Digital zoom
Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital
video image. It is accomplished electronically, without any adjustment of the camera's optics,
and no optical resolution is gained in the process.
Select
On
to enable this feature.
Select
Off
to disable this feature.
5.9
PTZ Settings
Auto pan speed
Continuously pans the camera at a speed between right and left limit settings. Type a value
between 1 and 60 (expressed in degrees), inclusive. The default setting is 30.
Inactivity
Selects the time period the dome must be not controlled until the inactivity event will be
executed.
–
Off
(default): camera remains on a current scene indefinitely.
–
Pre-position 1
: camera returns to
Pre-position 1
.
–
Previous AUX
: camera returns to the previous AUX activity.
Inactivity period
Determines the behavior of the camera when the control for the camera is inactive. Select a
time period from the pull-down list (3 s - 24 h). The default setting is 2 minutes.
Number of sectors
Select the appropriate number of sectors (for example, 4, 6, 12, or 16).
Note
: The number that you select in this field determines the number of sectors that appear in
the
Sectors
page (below).
Auto pivot
The Auto pivot tilts the camera through the vertical position as the camera is rotated to
maintain the correct orientation of the image. Set the Auto Pivot to On (default) to
automatically rotate the camera 180º when following a subject traveling directly beneath the
camera. To disable this feature, click Off.
Summary of Contents for MIC IP starlight 7000i
Page 2: ......
Page 84: ...84 Support AUTODOME IP starlight 7000i 2020 07 v0 7 User Manual Bosch Security Systems ...
Page 85: ......