AUTODOME IP starlight 7000i
Camera | en
25
Bosch Security Systems
User Manual
2020-07 | v0.7 |
If you select this option, the camera disables
Shutter
automatically.
Shutter
Adjusts the electronic shutter speed (AES). Controls the time period for which light is
gathered by the collecting device. The default setting is 1x (60 Hz: 1/30, 50 Hz: 1/25)
Maximum automatic exposure
Use this field to limit the integration time when Frame Integration is active. The range of
options is from 1/4 to 1/30 (default).
Default shutter limit
The camera tries to hold this shutter value as long as sufficient ambient light is available in the
scene.
The range of options is from
1/60
to
1/10000
. The default value is
1/120
for all modes except
Motion
(default
1/500
).
Backlight compensation
The function will ignore small areas of high illumination directly into the camera. The function
increases the brightness of the overall screen to make sure that subjects and the larger
portion of the scene remain bright.
Select
Off
to stop
Backlight compensation
. (Default)
Select
On
to start
Backlight compensation
.
Note
: You cannot use
High dynamic range
and
Backlight compensation
at the same time.
(When
High dynamic range
is On,
Backlight compensation
is Off.)
※
Backlight compensation
does not work in
Fixed shutter
mode.
Day/night
Night mode
Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following
options:
–
Monochrome
: Forces the camera to stay in Nigh Mode and transmit monochrome images.
–
Color
: The camera does not switch to Night Mode regardless of ambient light conditions.
–
Auto
(default): The camera switches out of Night Mode after the ambient light level
reaches a pre-defined threshold.
Night mode threshold
Adjusts the level of light at which the camera automatically switches out of night mode (B/W)
operation. Select a value between 10 and 55 (in increments of 5; default 40). The lower the
value, the earlier the camera will switch to color mode.
Night mode priority
Select the option to which the camera should give priority while in night mode:
–
Motion
–
Color (default)
Night mode shutter
Controls the time period for which light is gathered by the collecting device while in night
mode. Values are ¼, 1/8, 1/15, and 1/30; the default is 1/15.
5.2.2
Enhance
All settings on this page except for Intelligent Noise Reduction are scene-mode specific. This
means that sharpness/noise suppression/HDR can be adjusted on each scene mode.
Summary of Contents for MIC IP starlight 7000i
Page 2: ......
Page 84: ...84 Support AUTODOME IP starlight 7000i 2020 07 v0 7 User Manual Bosch Security Systems ...
Page 85: ......
