Bosch LTE65, Manual

Page: 15 / 28

Tools | 4
Bosch Motorsport Telemetry_System_LTE65_Manual 15 / 28
The telemetry uses available bandwidth and channels are grouped into fast and slow fre-
quency blocks, an explanation and visual representation below:
Fast block (block 1): transferred every cycle and used for a high-frequent transmission of
channel information (e.g. speed, rpm).
Slow blocks (block 2..n): transferred every nth cycle and used for a low-frequent transmis-
sion of channel information (e.g. tire pressure, oil temperature).
Only one fast block exists, up to seven fast blocks will automatically be created by Race-
Con depending on the number and data types of channels. If the maximum bandwidth of
a block is reached, a warning will be displayed. To fix this problem you can view the alloc-
ation of the channels and data rate in the ‘Statistics’ tab of the Main Area.
4.3 WDServer
WDServer is used to capture data streaming from transmitters and convert to WinDarab
file format; WDServer also creates a log of the data received over telemetry.