1 689 989 293
2020-08-24
|
Robert Bosch GmbH
| 24 | KTS 350 (KTS 3a Series) | Restoring the operating system (recovery)
7. Restoring the operating
system (recovery)
For Windows 10, Microsoft has begun offering the
operating system as "software as a service." This means
that the operating system will no longer be replaced
by a successor but instead continuously modified and
expanded. For some licensing models like the internet-of-
things (IoT) version of Windows 10, major modifications
to the range of functions are no longer covered by the
existing license.
!
Always use the latest recovery version (image) for
the installed Windows version (e.g. Windows 10
Enterprise 2019 LTSB).
!
Different versions of Windows are not mutually
compatible and are also subject to different
licensing specifications. For this reason, the recovery
medium used during recovery must match the installed
Windows version.
Windows version
Recovery version Order number
Windows 10 LTSC 2019
V3.40
–
Windows 10 LTSB 2016
V2.10
1 687 005 134
Windows 10 LTSB 2015
V1.40
1 687 005 122
7.1
Identifying the installed Windows
version
1.
Select "
This PC >> System properties
."
2.
The installed version is indicated in the
"
Device specifications
" area under "
Windows
specifications
."
i
If the operating system cannot be started, the
Windows version installed can be found on the
licensing label. The licensing label is attached to
the underside of the housing, below the storage
battery, on the right.
7.2
Downloading the ISO installation
file (image)
¶
Use the following link to download the current
image of the installed Windows version:
http://cdn.esitronic.de/TED/KTS350/Downloads/index.html
7.3
Creating a recovery USB stick
A recovery USB stick is required to perform the
recovery. The recovery USB stick must be bootable.
This way, it is possible to launch the operating
system from the recovery USB stick even if there is
no working operating system installed. The following
is a description of how any commercially available
USB stick can be turned into a bootable recovery USB
stick.
7.3.1
Prerequisites
Due to the image's data volume (approx. 10 GB), the
following minimum prerequisites apply to the creation
of a bootable recovery USB stick.
Component
Details
Data storage device
USB stick (min. 16 GB)
Available hard drive memory
capacity
≥ 10 GB
Installation file
Image of the required
Windows version (ISO file)
en
Summary of Contents for KTS 350
Page 2: ......
