en
30
Interior fittings
All variable parts of the appliance
can be taken out for cleaning.
Take out glass shelves
Fig.
3
Lift the glass shelves, pull forwards,
lower and swivel out to the side.
Take out shelves in the door
Fig.
4
Lift shelves upwards and take out.
Removing the container
Fig.
*
Pull out the container all the way and lift
to detach it.
To insert the container, place on
the telescopic rails and push into
the appliance. Attach the container by
pressing it down.
Taking out the humidity filter
Fig.
1
/9
The humidity filter over the humidity
container can be taken out for cleaning.
To do this, first take out the humidity
container and pull out the humidity filter.
Lift off the filter cover, Fig.
+
, and take
out the filter. Clean in lukewarm water,
leave to dry and re-assemble.
Installing extension rails
Fig.
,
1. To remove the extension rails, bend
slightly at the front in the direction of
the arrow.
2. Lift extension rail and detach from the
mounting.
3. To install the extension rail, insert into
the rear opening.
4. Insert extension rail into the front
opening and engage downwards.
Tips for saving energy
■
Install the appliance in a dry, well
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source
(e.g. radiator, cooker).
If required, use an insulating plate.
■
Allow warm food and drinks to cool
down before placing in the appliance!
■
When thawing frozen products, place
them in the refrigerator.
Use the coldness of the frozen food
to cool food.
■
Open the appliance as briefly
as possible.
■
Occasionally clean
the rear of the appliance
with a vacuum cleaner or paint brush
to prevent an increased power
consumption.
