Bosch KGN36HI32, User Manual

Page: 43 / 140

Home Connect
en
43
Activating the cameras
If the refrigerator is connected to the
home network (WLAN) and to the Home
Connect app, you can activate the
cameras:
1.
Press the
alarm off
button.
The refrigerator compartment
temperature display shows
Cn
.
2.
Keep pressing button
+
refrigerator
compartment until the refrigerator
compartment temperature display
shows
CA
and the freezer
compartment temperature display
shows
OF
.
3.
Press button
+
freezer compartment.
The freezer compartment
temperature display shows
On
and
the energy saving mode display
lights up.
The cameras are activated.
Notes
■
If the cameras are activated and the
refrigerator contents are interrogated
frequently via the app, this will result
in increased data transfer.
■
Uploading the photos takes up to
three minutes.
■
Various external factors in the home
network and Internet cause transfer
problems and pictures to be
discarded. This has no effect on the
basic functions of the appliance.
Deactivating the cameras:
1.
Press the
alarm off
button.
The refrigerator compartment
temperature display shows
Cn
.
2.
Keep pressing button
+
refrigerator
compartment until the refrigerator
compartment temperature display
shows
CA
and the freezer
compartment temperature display
shows
On
.
3.
Press button
-
freezer compartment.
The freezer compartment
temperature display shows
OF
.
The cameras are deactivated.
Resetting Home Connect settings
If there is a problem when trying to
establish a connection or if you would
like to register the appliance in a
different home network (WLAN), the
Home Connectsettings can be reset:
1.
Press the
alarm off
button.
The refrigerator compartment
temperature display shows
Cn
.
2.
Press button
+
refrigerator
compartment until the refrigerator
compartment temperature display
shows
rE
and the freezer
compartment temperature display
shows
OF
.
3.
Press button
+
freezer compartment.
Freezer compartment temperature
display shows an animation for 15
seconds.
Then the freezer compartment
temperature display shows
OF
.
The energy saving mode display
does not light up.
The Home Connect settings have
been reset.
Installing updates for the
Home Connect software
The refrigerator checks at regular
intervals whether updates are available
for the Home Connectsoftware.
If an update is available, the refrigerator
compartment temperature display
shows
"UP"
.
Pressing any button will reset the
display to the set temperature.
Installing the update:
1.
Press the
alarm off
button.
The refrigerator compartment
temperature display shows
Cn
.
2.
Press button
+
refrigerator
compartment until the refrigerator
compartment temperature display
shows
UP
and the freezer
compartment temperature display
shows
OF
.