Home Connect
en
21
o
Home Connect
Home Connect
This appliance is Wi-Fi-capable and can be remotely
controlled using a mobile device.
Note:
Wi-Fi is a registered trademark of the Wi-Fi
Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can still
be operated manually using the controls:
■
The appliance is not connected to a home network.
■
The Home Connect service is not available in the
country in which the appliance is set up. For an
overview of the countries in which Home Connect is
available, see www.home-connect.com.
Note:
Please observe the safety instructions in this user
manual. Ensure that these are also observed if you
operate the appliance via the Home Connect app and
are not at home when doing so.
"Safety instructions" on page 3
Please also follow the instructions in the Home Connect
app.
The appliance has a wireless transmitting module, via
which the intelligent function of the appliance is
realized. The CMIIT ID of the appliance is shown in the
rating plate.
Setting up Home Connect
Notes
■
Observe the Home Connect supplementary sheet,
which is available for download under http://
www.bosch-home.com with the instructions. To do
so, enter the E-number of your appliance in the
search field.
■
After switching on the appliance, wait at least two
minutes until internal device initialisation is complete.
Only then start setting up Home Connect.
■
To implement settings with Home Connect, the
Home Connect app must be installed on your mobile
device.
Observe the supplied Home Connect documents for
this.
Follow the steps specified by the app to implement
the settings.
■
The Home Connect menu will close automatically
when the appliance is not operated for a lengthy
period of time. You can find information on how to
open the Home Connect menu at the start of the
appropriate sections.
Automatic connection to the home network (WLAN)
If a WLAN router with WPS function is available, the
refrigerator can be automatically connected to the
home network.
1.
Press
menu
button.
The
connect
display illuminates.The cool-fresh
compartment temperature display shows
Cn
.
2.
Press
Y
/
X
cool-fresh compartment button until the
cool-fresh compartment temperature display
shows
AC
and the freezer compartment temperature
display shows
OF
.
3.
Press
Y
/
X
freezer compartment button.
The appliance is ready for automatic connection.
The freezer compartment temperature display shows
an animation for 2 minutes.
The appliance is ready for automatic connection for
as long as the animation is displayed.
4.
Within those 2 minutes activate the WPS function on
the home network router (e.g. using WPS/
WLAN button. Note the information in the router
documentation).
If connection is successful,
On
flashes in the freezer
compartment temperature display.
The refrigerator is ready to connect to the app.
Note:
If the freezer compartment temperature display
shows
OF
, no connection could be established.
1.
Check whether the refrigerator is located within the
range of the home network (WLAN).
2.
Repeat the process or establish the connection
manually.
Manual connection with home network (WLAN)
If the available WLAN router does not have a
WPS function or if this is unknown, you can connect the
refrigerator to the home network (WLAN) manually.
1.
Press
menu
button.
The
connect
display illuminates.The cool-fresh
compartment temperature display shows
Cn
.
2.
Press
Y
/
X
cool-fresh compartment button until the
cool-fresh compartment temperature display
shows
SA
and the freezer compartment temperature
display shows
OF
.
3.
Press
Y
/
X
freezer compartment button.
The appliance is ready for manual connection.
The freezer compartment temperature display shows
an animation.
The appliance is ready for manual connection for as
long as the animation is displayed.
4.
The refrigerator has now set up its own
WLAN network with the network
name HomeConnect.
You can now access this network with your mobile
device.
5.
Follow the instructions in the app until the process is
complete.
– If connection is successful,
On
flashes in the
freezer compartment temperature display.
The device connects to the app automatically.
– If the freezer compartment temperature display
shows
OF
, no connection could be established.
Check whether the refrigerator is located within
the range of the home network (WLAN).
Repeat the process.
