|
7
Technical Instructions
IDS BOVA E-Box Replacement - BTC 761702110 B (09.2022)
11. Unscrew 4 screws to remove reactor box and white wiring harness. This is not
needed for the new control board. Refer to Figure 8.
Figure 8
Reactor Box Removal
CAUTION: PERSONAL INJURY
Reactor box is heavy, be careful when removing.
NOTICE: PRODUCT DAMAGE
Potential risk for fan motor/blades to become damaged if
reactor box and connected white wiring harness are not
removed from unit.
12. Unit should look like should look like Figure 9.
Figure 9
E-box, Bottom Access Panel, Reactor Box Removed
13. Slide in the new E-box in from the top and secure with screws saved in Step
8. Note: The sides of the E-box should line up and slide into the guide rails on
the unit. Refer to Figure 10.
Figure 10
Left Corner
Right Corner
Top Corner of E-Box
