6
|
Technical Instructions
IDS BOVA E-Box Replacement - BTC 761702110 B (09.2022)
7. Carefully pull the wires from the bottom left and right hole through the back
of the E-Box. See Figure 5.
Figure 5
Pull wires through left hole
Pull wires through right hole
Remove Wires From Holes in E-Box
8. Unscrew the 7 screws to remove E-box. Slide E-box up to remove. Keep all
screws for reuse. Refer to Figure 6.
Remove E-box by fi rst lifting up and then out.
Figure 6
Slide upward
E-Box Removal
9. Unscrew 2 screws (red) on the panel and 2 screws (blue) mounting the “true
suction” service port. Remove Bottom Access Panel. Keep screws to re-install
later. See Figure 7.
Figure 7
“true
suction”
service
port
T4
Remove Bottom Access Panel
10. Cut 3 zip ties bundling the reactor box white harness
