Bosch I 8 OptiMUM Series, Information For Use

Page: 23 / 140

Scales en
23
a
The appliance stops processing
automatically and the display
shows "ROTATE THE SWITCH TO
0".
5.
Set the rotary switch to ⁠.
9.5 Using the timer without
processing
1.
If the display is switched off, press
any button.
2.
Press ⁠.
a
The display shows "TIMER" and
"00:00".
3.
Use or to set the required
duration.
4.
To start the timer, briefly press
twice.
a
The display counts down the re-
maining time.
a
Once this time has elapsed, a sig-
nal tone sounds and the display
shows "END""TIMER".
9.6 Pausing or switching off
the timer
Requirements
¡
The timer is running.
¡
The display shows the time that
has elapsed.
1.
Briefly press twice.
a
The timer stops.
a
The remaining time is displayed
continuously.
2.
Briefly press twice.
a
The timer starts again.
a
The remaining time continues to
count down.
3.
To switch the timer off, press and
hold down ⁠.
a
The display shows "OptiMUM".
10 Scales 1
Your appliance is equipped with a set
of scales. You can weigh ingredients
individually or a preset a weight.
The base unit has 4 weight sensors
in its feet.
The following factors can falsify the
measuring result:
¡
Feet not standing on the work sur-
face properly
¡
Work surface vibrating
¡
Objects underneath the base unit
¡
Ingredient quantities less than 5 g
or 0.01 lb
¡
Base unit slipped
¡
Base unit touched
¡
Objects on the base unit
10.1 Display values of scales
Observe the following values when
using the scales.
Display unit in grams
Display range -990 g to 5000 g
Display steps 5 g
Settings range 50 g to 3000 g
Settings steps 10 g
Display unit in pounds
Display range -2.20 lb to
11.00 lb
Display steps 0.01 lb
Settings range 0.10 lb to 6.60 lb
Settings steps 0.02 lb
Tip:
You can change the display
units of the scales at any time.
→ "Overview of basic settings",
Page 21
1
Depending on the appliance specifications