en
Childproof lock
20
▶
Reset the end time to the current time plus the set
cooking time using the button.
a
After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
11.5 Setting the time
Once the appliance has been connected to the mains
or after a power cut, the time flashes in the display. The
time starts at "12:00". Set the current time.
Requirement:
The function selector must be set to the
off position.
1.
Use or to set the time.
2.
Press .
a
The time that is set appears in the display.
12 Childproof lock
Secure the appliance to prevent children from accident-
ally switching it on or changing the settings.
Note:
After a power cut, the childproof lock will no
longer be active.
12.1 Activating and deactivating the
childproof lock
Requirement:
The function selector must be set to the
off position.
▶
To activate the childproof lock, press and hold the
button until appears in the display.
‒
To deactivate the childproof lock, press and hold
the button until goes out in the display.
13 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
13.1 Cleaning agent
To avoid damaging the different surfaces of the appli-
ance, do not use unsuitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶
Do not use aggressive or abrasive cleaning agents.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners if the appliance is
still warm.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶
Do not use oven cleaner in the cooking compart-
ment when it is still warm.
▶
Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
▶
Wash new sponge cloths thoroughly before use.
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Follow the instructions on cleaning the appliance.
→
"Cleaning the appliance", Page 21
Appliance
Surface
Suitable cleaning agents Information
Stainless steel
¡
Hot soapy water
¡
Special stainless steel
cleaning products
suitable for hot sur-
faces
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel fronts immediately.
Apply a thin layer of the stainless steel cleaning product with a soft
cloth.
Enamel, plastic,
painted, and
screen-printed
surfaces
E.g. control panel
¡
Hot soapy water
Do not use glass cleaner or a glass scraper.
Knobs
¡
Hot soapy water
Clean with a dish cloth and dry with a soft cloth.
Do not remove or scrub.
