Bosch HSG936A 1 Series, User Manual And Installation Instructions

Page: 23 / 56

Basic settings
en
23
15 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
You can find more information about the individual ba-
sic settings on the display using ​⁠"Info".
Basic settings Selection
Language See selection on the appliance.
Home Connect Connect the oven to a mobile device
and remotely control it.
→
"Home Connect ", Page 24
Time Time in 24-hour format.
Display Selection
Brightness
¡
Levels 1
1
, 2, 3, 4 and 5
Standby
screen
¡
On for a limited time
¡
Off
1
Time
¡
Digital
1
¡
Analogue
Alignment
¡
Align the display horizontally and
vertically.
1
Factory setting (may vary according to model)
Sound Selection
Button tone
¡
On
1
¡
Off
Signal tone
¡
Very short duration
¡
Short duration
¡
Medium duration
1
¡
Long duration
1 Factory setting (may vary according to model)
Appliance set-
tings Selection
Fan run-on
time
¡
Minimum
¡
Recommended
1
¡
Long
¡
Very long
Pull-out system
¡
Retrofitted (if 2 or 3 sets of pull-
out rails are fitted)
¡
Not retrofitted (if shelf supports
and a single set of pull-out rails
are fitted)
1
Lighting
¡
When cooking and when the door
is opened
1
¡
Only when the door is opened
¡
Always off
Water hard-
ness
¡
4 (very hard)
1
¡
3 (hard)
¡
2 (medium)
¡
1 (soft)
¡
0 (softened)
1
Factory setting (may vary according to model)
Personalisa-
tion Selection
Brand logo
¡
Display
1
¡
Do not display
Operation after
switch-on
¡
Main menu
1
¡
Types of heating
¡
Steam
¡
Dishes
¡
Favourites
Elapsed cook-
ing time
¡
Display
1
¡
Do not display
Dishes
¡
All
1
¡
No pork
¡
Kosher only
Regional
dishes
¡
All
1
¡
European dishes
¡
British dishes
Childproof
lock
¡
Button lock only
1
¡
Deactivated
Automatic
rapid heating
¡
On
1
¡
Off
1 Factory setting (may vary according to model)
Factory set-
tings Selection
Factory set-
tings
¡
Restore
Info Indicator
Appliance in-
formation Display technical information about
the appliance.
15.2 Changing the basic settings
1.
Press "Basic settings" in the menu.
2.
Press the required basic settings area.
3.
Press the required basic setting.
4.
Press to select the required basic setting.
a
The change is applied directly for most basic set-
tings.
5.
To change additional basic settings, use ​⁠ to go
back and select a different basic setting.
6.
To exit the basic settings, use ​⁠ to go back to the
main menu or switch off the appliance using ​⁠.
a The changes are saved.
Note:
Your changes to the basic settings will be re-
tained even after a power failure.
15.3 Setting the time
1.
Press "Basic settings" in the menu.
2. Press "Time".
3.
To set the time, press the hour display or the minute
display.
a
The selected value is marked in blue.
4. Use the setting ring to set the time.