Basic settings
en
23
Q
Basic settings
Basic settings
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Changing the basic settings
The function selector is set to the "Off" position.
1.
Press and hold
v
for approx. 4 seconds.
The first basic setting appears in the display,
e.g.
™‹
‚
.
2.
If required, use
A
or
@
to change the setting.
3.
Press
v
to confirm.
The next basic setting appears in the display.
4.
Use
v
to scroll through all of the basic settings and,
if required, use
A
or
@
to change any of these
settings.
5.
Press
v
again to confirm. Press and hold for
4 seconds.
This applies all the basic settings.
You can change the basic settings again at any time.
Note:
Following a power failure, the factory basic
settings are restored.
D
Cleaning
Cleaning
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
Cleaning agents
Damage to the various different surfaces caused by
using the wrong cleaning agent can be avoided by
observing the following instructions.
When cleaning the hob do not use
■
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or
stain remover,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
■
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Basic setting
Selection
™‹
Clock display
‹
= hide the clock
‚
= display the time*
™‚
Signal duration upon com-
pletion of a cooking time or
timer period
‚
= approx. 10 seconds
ƒ
= approx. 30 seconds*
„
= approx. 2 minutes
™ƒ
Acoustic signal when a but-
ton is pressed
‹
= Off
‚
= On*
™„
Waiting time until a setting
is adopted.
‚
= approx. 3 seconds*
ƒ
= approx. 6 seconds
„
= approx. 10 seconds
™…
You can activate the button
lock.
‹
= No
‚
= Yes*
* Factory setting (factory settings may vary depending on the appli-
ance type)
Zone
Cleaning agent
Stainless steel sur-
faces*
(depending on appli-
ance model)
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. On stainless steel surfaces, always wipe
parallel to the natural grain. Otherwise, you
may scratch the surface. Remove patches and
splashes of limescale, grease, starch and albu-
min (e.g. egg white) immediately. Corrosion
can form under such patches and splashes.
Special care products suitable for hot stainless
steel surfaces are available from our after-
sales service and from specialist retailers.
Apply a thin layer of care product with a soft
cloth.
Enamel, painted, plas-
tic and screen-printed
surfaces*
(depending on appli-
ance model)
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
Control panel
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
* Optional (available for some appliances, depending on the appliance
model)