Oven operation
en-us
25
¡
Never use heat-proof glass; it cannot tolerate the high
temperature.
8.7 Basic Settings - Oven
You can configure the basic settings for your appliance to meet your needs.
List of basic settings
Depending on the features of your appliance, not all basic settings will be available.
Display
Function
Options
Signal duration upon completion of a
cooking time or timer duration
= approx. 10 seconds
= approx. 30 seconds
1
= approx. 2 minutes
Waiting time until a setting is applied
= approx. 3 seconds
1
= approx. 6 seconds
= approx. 10 seconds
Button tone that sounds when a button
is touched
= off
= on
1
Brightness of the display illumination
= dim
= medium
1
= bright
Displays the clock time
= hide the clock
= display the 12-hour clock
1
= display the 24-hour clock
Interior lighting on when appliance in
operation
= no
= yes
1
Cooling fan run-on time
°F /
°C = At over 284 °F/
140 °C
1
°F /
°C = At over 230 °F/
110 °C
°F /
°C = At over 176 °F/
80 °C
°F / °C = At over 140 °F/
60 °C
Reset all values to factory settings
= no
1
= yes
Activate demo mode. Demo mode is
used for demonstration purposes – the
oven does not actually heat in demo
mode. Demo mode can only be acti-
vated within 5 minutes of connecting
the appliance to the mains power sup-
ply.
= no
1
= yes
Set the temperature unit.
= Fahrenheit (°F)
1
= Celsius (°C)
Sabbath mode available
= no
= yes
1
1
Factory setting (may vary according to model)
Changing the basic settings
The function selector must be set to the "Off" position.
1.
Press and hold the button for approx. 4 seconds. The
first basic setting appears on the display, e.g., .
2.
Press the button again to change the selected basic
setting.
3.
Use the or button to change the basic setting.
4.
Press the button again to save the basic setting.
5.
Use the button to navigate to the next basic setting.
6.
Use the or button to continue going through all of
the basic settings as described above and use the
button to select and change the settings if necessary.
7.
When you have finished, press and hold the button
again for approx. 4 seconds to confirm the settings. This
applies all the basic settings.
a
This applies all the basic settings.
Note
¡
You can change the basic settings again at any time.
Demo mode can only be activated within 5 minutes of
connecting the appliance to the mains power supply.
