Cooktop operation
en-us
19
Turning off the CombiZone
▶
Turn the two left control knobs back to 0.
a
A beep sounds.
a
The two cooking zones can be used independently.
7.5 Warming zone
With the warming levels you can use preset power levels for various applications.
Power level
Function
Display
Temperature °F (°C)
W1
Keep warm
115 (45)
W2
Melting
160 (70)
W3
Simmering
205 (95)
Setting the warming level
▶
Push and turn the control knob to the desired warming
level.
a
The temperature is kept automatically at the desired
level.
7.6 SpeedBoost®
With this function you can heat larger quantities of water
faster than with power level 9. This function temporarily in-
creases the top output of the selected cooking zone.
Activating SpeedBoost®
WARNING
Oil and fat heat up quickly with the SpeedBoost® function.
Overheated oil and fat may ignite.
▶
Never leave the cooktop unattended during cooking.
▶
Turn the control knob of the desired cooking zone clock-
wise to max and hold it in this position for 3 seconds.
a
lights up in the cooking zone display.
a
SpeedBoost® is activated for 10 minutes.
a
After 10 minutes a signal sounds and the cooking zone
switches to power level .
Deactivating SpeedBoost®
If you do not deactivate the SpeedBoost® function, it turns
off automatically after 10 minutes. The cooking zone con-
tinues operating with power level 9.
▶
Turn the control knob to a different power level.
a
goes out.
a
The cooking zone switches to power level .
Note: In certain circumstances, this function may switch
off automatically in order to protect the electronic elements
inside the cooktop.
7.7 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
Turning the panel lock on
Requirement: The cooktop is turned off.
▶
Push and turn the two left cooktop control knobs
counter-clockwise to and hold them in this position for
3 seconds.
a
lights up in the cooking zone display.
a
The cooktop does not respond when any control knob is
operated.
Turning the panel lock off
▶
Push and turn the two left cooktop control knobs
counter-clockwise to and hold them in this position for
3 seconds.
a
The cooktop control panel is unlocked.
7.8 Automatic time limitation
If a cooking zone is used for a prolonged period of time
without changes in the settings being made, the automatic
time limitation function is triggered.
The cooking zone stops heating.
and the residual heat
indicator / flash alternately in the display.
The indicator goes out when the control knob is set to 0.
The cooking zone can now be reset.
