13
Setting the oven
There are various ways in which you can set your oven. Here
we will explain how you can select the desired type of heating
and temperature or grill setting. You can select the cooking
time and end time for your dish on the oven.
Types of heating and temperature
Example in the picture: 190 °C,
%
Top/bottom heating.
1.
Use the function selector to select the required type of
heating.
2.
Use the temperature selector to set the temperature or the
grill setting.
The oven heats up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.
Switching off the oven automatically
Enter a cooking time for your dish.
Example in the picture:
%
Top/bottom heating, 200 °C,
cooking time 45 minutes.
1.
Use the function selector to select the required type of
heating.
2.
Use the temperature selector to set the temperature or the
grill setting.
3.
Press the
0
Clock button twice.
The
x
Cooking time symbol flashes.
4.
Use the + or - button to set the cooking time.
+ button / default value = 30 minutes
- button / default value = 10 minutes
The oven starts after a few seconds. The
x
symbol appears
in the display.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
0
button
twice and switch off the function selector.
Cancelling the setting early
Press the
0
Clock button twice. Press the - button until a zero
appears in the display. Switch off the function selector.
Changing the setting
Press the
0
Clock button twice and make your settings as
described in section 4.
Note:
You can change the setting while the symbol is flashing.
When the symbol lights up, the setting has been adopted.
Rapid heating
With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
1.
Set the function selector to
I
.
2.
Turn the temperature selector to set the desired temperature.
The
p
symbol lights up in the display. The oven begins to heat
up.
The rapid heating process is complete.
The
p
symbol goes out in the display. Place your dish in the
oven and select the desired type of heating.
