Transportation and disposal
en
23
Fault
Cause and troubleshooting
The burner flame
goes out while the
appliance is in opera-
tion.
Gas cylinder is empty.
▶
Replace the gas cylinder.
The gas grill does not
work.
The protective plate is incorrectly inserted.
1.
Ensure that the protective plate has been inserted correctly.
2.
Remove the protective plate and reinsert it.
14.2 Replacing the oven light bulb
If the light in the cooking compartment fails, change
the oven light bulb.
Note:
Heat-resistant, 25-watt bulbs are available from
the after-sales service or specialist retailers. Only use
these bulbs.
WARNING ‒ Risk of burns!
The appliance and its parts that can be touched be-
come hot during use.
▶
Caution should be exercised here in order to avoid
touching heating elements.
▶
Young children under 8 years of age must be kept
away from the appliance.
WARNING ‒ Risk of electric shock!
When changing the bulb, the bulb socket contacts are
live.
▶
Before replacing the bulb, ensure that the appliance
is switched off in order to prevent a potential electric
shock.
▶
Also unplug the appliance from the mains or switch
off the circuit breaker in the fuse box.
Requirements
¡
The appliance is disconnected from the power sup-
ply.
¡
The cooking compartment has cooled down.
¡
A new halogen bulb to replace the old one is avail-
able.
1.
Place a tea towel in the cooking compartment to
prevent damage.
2.
Turn the glass cover anti-clockwise to remove it.
3.
Remove the oven light bulb.
4.
Replace the oven light bulb with the same type of
bulb.
5.
Screw in the glass cover.
6.
Remove the tea towel from the cooking compart-
ment.
7.
Connect the appliance to the power supply.
14.3 Glass cover
If the glass cover is damaged, replace it immediately.
Suitable glass covers are available from the after-sales
service.
Specify the E number and FD number of your appli-
ance.
15 Transportation and disposal
You can find out here how to prepare your appliance
for transportation. You will also find out how to dispose
of old appliances.
15.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
1.
Unplug the appliance from the mains.
2.
Cut through the power cord.
3.
Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
