Basic operation
en
17
Example
Food
Hotplate
Power level
Braising*
Potatoes and miscellaneous ve-
getables, meat
Standard output
burner
Between large and small flame
Boiling*
Rice, vegetables, meat dishes
(with sauces)
Standard output
burner
Large flame
Frying
Pancakes, potatoes, schnitzel,
fish fingers
Large burner**
Wok burner**
Between large and small flame
Between large and small flame
Note:
Information
¡
* If you are using a pan with a lid, turn the flame
down as soon as the food starts to boil.
¡
** Optional. Available for some appliances. Depend-
ing on the appliance type. (For frying on the wok
burner, we recommend that you use a wok.)
10 Basic operation
10.1 Setting the lower oven gas burner
When the lower gas burner is lit, you can start to bake
on a baking tray with the oven door closed.
WARNING ‒ Risk of fire!
Escaping gas may ignite.
▶
If the burner does not ignite after 15 seconds, turn
the control knob to the "Off" position and open the
door or window in the room. Wait at least one
minute before igniting the burner again.
▶
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one
minute.
ATTENTION!
The burner may go out accidentally.
▶
If the burner's flame accidentally goes out, switch off
the burner's selector and wait at least one minute
before igniting the burner again.
1.
Open the top cover, if available.
The top cover must remain open while the appli-
ance is running.
2.
Turn on the main gas supply to the appliance. Insert
the plug in the socket. Open the oven door.
3.
Push in the function selector and turn it anti-clock-
wise to set the desired temperature. Keep the func-
tion selector pressed in and press at the same
time.
a
Use the igniter to ignite the gas that escapes from
the lower gas burner.
4.
To activate the safety pilot, press and hold the func-
tion selector for 10 seconds.
a
The safety pilot is therefore activated. If the gas
flame goes out, the gas supply is automatically shut
off by the safety pilot.
5.
Check through the opening in the oven's bottom
panel that the flame is burning.
If the flame is not burning, repeat the steps.
6.
Close the oven door carefully.
7. Note:
Preheat the empty oven for 15 minutes and
then start the preparation.
You can change the temperature at any time.
Once the food is cooked, switch off the function se-
lector.
10.2 Setting the oven gas grill
If the gas burner for the gas grill is lit, you can grill in
the oven.
WARNING ‒ Risk of fire!
Escaping gas may ignite.
▶
If the burner does not ignite after 15 seconds, turn
the control knob to the "Off" position and open the
door or window in the room. Wait at least one
minute before igniting the burner again.
▶
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one
minute.
ATTENTION!
The burner may go out accidentally.
▶
If the burner's flame accidentally goes out, switch off
the burner's selector and wait at least one minute
before igniting the burner again.
The gas grill only works when the protective plate is in-
serted.
▶
Ensure that the protective plate has been inserted
correctly.
1.
Open the top cover, if available.
The top cover must remain open while the appli-
ance is running.
2.
Turn on the main gas supply to the appliance. Insert
the plug in the socket. Open the oven door.
3.
Insert the protective plate with the symbol facing up-
wards in such a way that the lugs lie completely in
the notches.
There are three notches below the control panel. In-
sert the three lugs on the protective plate into the
three notches.
4.
Close the oven door so that it is as close as pos-
sible to the protective place.
5.
Push in the function selector and turn it clockwise to
the grill setting .
6.
Keep the function selector pressed in and press the
ignition button at the same time.
Keep the function selector pushed in for 10
seconds so that the safety pilot starts up.
a
The safety pilot is activated. If the gas flame goes
out, the gas supply is automatically shut off by the
safety pilot.
7.
Check whether the flame is burning.
