![background image](http://html.mh-extra.com/html/bosch/hbm56b551/hbm56b551_instruction-manual_47294012.webp)
12
Setting a later end time
See Setting a later end time in the Time
setting options section.
Setting rapid heating
You can set rapid heating for the
ó
main oven with the
following types of heating:
■
<
= 3D hot air
■
%
= Top/bottom heating
■
6
= Pizza setting
A brief audible signal indicates that the type of heating selected
is not suitable for rapid heating.
Suitable temperatures
The rapid heating function will work only if the temperature
setting is above 100 °C. Rapid heating is not necessary if the
temperature in the cooking compartment is only slightly lower
than the temperature set. It will not switch on.
Setting rapid heating
Press the
c
button to activate rapid heating. The
c
symbol
appears next to the selected temperature. The temperature
indicator bars start filling.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
c
symbol goes out.
Cancelling rapid heating
Press the
c
button. The symbol goes out.
Notes
■
Rapid heating is cancelled if you change the type of heating.
■
If a cooking time has been set, this counts down after the
appliance is started, regardless of whether rapid heating has
been set.
■
You can use the
°
button to check the current heating
temperature during rapid heating.
■
To ensure an even cooking result, do not place your dish in
the cooking compartment until rapid heating is complete.
Time-setting options
The
ó
main oven has various time-setting options, which you
can call up using the
0
button. The following functions are
available:
If the oven is switched off:
■
U
= Sets the timer
■
0
= Sets the clock
If the oven is switched on:
■
U
= Sets the timer
■
r
= Sets the cooking time
■
p
= Sets a later end time
The brackets around the symbol indicate that this function is
selected. After the appliance is started, the brackets indicate
which time-setting option is currently running in the display.
Setting the time-setting options
in brief
1.
Press the
0
button to open the menu.
2.
Select the desired function with the
X
button.
3.
Set the desired value with the rotary selector.
4.
Press the
0
button to close the menu.
A detailed description of how to adjust each individual function
is provided below.
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time, regardless of whether oven
is switched on or off.
1.
Press the
0
button.
The time-setting options menu appears. The [
U
] symbol in
brackets shows that the timer function is selected.
2.
Set the running time for the timer using the rotary selector.
3.
Press the
0
button to close the menu.
The time counts down in the clock display.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
‹‹
:
‹‹
. Press the
0
button. The display goes out.
Cancelling the timer time
Press the
0
button to open the time-setting options menu.
Using the rotary selector, turn the time back to
‹‹
:
‹‹
. Press
the
0
button to close the menu.
Changing the timer time
Press the
0
button to open the time-setting options menu. Use
the rotary selector to change the time within the next few
seconds. Press the
0
button to close the menu.
Setting the cooking time
You can set a cooking time for your dish in the
ó
main oven.
Operation is ended automatically after this time. The main oven
stops heating.
Prerequisite: A type of heating and temperature are set for the
main oven.
Example shown below: Setting for
%
Top/bottom heating,
180 °C, cooking time of 45 minutes.
1.
Press the
0
button. The time-setting options menu appears.
The time-setting options are displayed in the left-hand side of
the display. The [
U
] timer function is selected.
2.
Switch to the [
r
] cooking time using the
X
button.
Summary of Contents for HBM56B551
Page 1: ... en Instruction manual Double oven HBM56B551B ...
Page 2: ......