en
Tested for you in our cooking studio
34
Roasting and braising in cookware
It is more convenient to roast and braise meat in
cookware. You can take the joint out of the cooking
compartment more easily in the cookware, and prepare
the sauce in the cookware itself.
Only use cookware which is suitable for use in an oven.
Check whether the cookware fits in the cooking
compartment.
Glass cookware is most suitable. Place hot glass
cookware onto a dry mat after cooking. If the surface is
damp or cold, the glass may crack.
Add in a little liquid for roasting if the meat is lean. A
covering of approx.
^
cm depth should be applied to
the base of any glass cookware.
The amount of liquid is dependent on the type of meat,
the cookware material and also on whether or not a lid
is used. If preparing meat in an enamelled or dark metal
roasting dish, it will need a little more liquid than if
cooked in glass cookware.
The steam evaporates in the cookware when roasting.
Carefully pour in more liquid if required.
Shiny roasting dishes made from stainless steel or
aluminium reflect heat like a mirror and are therefore
not particularly suitable. The meat cooks more slowly
and will not brown so much. Use a higher temperature
and/or a longer cooking time.
Observe the manufacturer's instructions for your
roasting cookware.
Uncovered cookware
Use a deep roasting tin/dish for roasting meat. Place
the tin/dish onto the wire rack. If you do not have any
suitable cookware, use the universal pan.
Covered cookware
When cooking with covered cookware, the cooking
compartment remains considerably cleaner. Ensure that
the lid fits well and closes properly. Place the cookware
onto the wire rack.
The distance between the meat and the lid must be at
least 3 cm. The meat may rise.
Very hot steam may escape when opening the lid after
cooking. Lift the lid at the rear, so that the hot steam
can escape away from you.
If necessary, braise the meat first by searing it. Add
water, wine, vinegar or a similar liquid to the braising
liquid. A covering approx. 1-2 cm deep should be
applied to the base of the cookware.
The steam evaporates in the cookware when roasting.
Carefully pour in more liquid if required.
Meat can also become crispy in a covered roasting
dish. To do so, use a roasting dish with a glass lid and
set a higher temperature.
Grilling
Keep the appliance door closed when using the grill.
Never grill with the appliance door open.
Slide the universal pan into the oven at the indicated
shelf position with the wire rack attached. Dripping fat
will be collected. Ensure that the wire rack is positioned
correctly on the universal pan.
~
"Accessories"
on page 10
Note:
When grilling very fatty items, do not slide the
universal pan in directly under the wire rack, but rather
at level 2.
When grilling, try wherever possible to use pieces of
food which are of a similar thickness and weight. This
will allow them to brown evenly and remain succulent
and juicy. Place the food to be grilled directly onto the
wire rack.
Use tongs to turn the pieces of food you are grilling. If
you pierce the meat with a fork, the juices will run out
and it will become dry.
Do not add salt to the food until after it has been grilled.
Salt draws water from the meat.
Notes
■
The grill element switches itself on and off
continuously; this is normal. The grill setting
determines how frequently this occurs.
■
Smoke may be produced when grilling.
Recommended setting values
You can find the ideal heating type for many meat
dishes in the table. Temperature and cooking time
depend on the amount, composition and temperature of
the food. Settings ranges are indicated for this reason.
Try using the lower values at first. You can increase the
temperature next time if necessary.
The setting values apply to chilled meat placed into the
cold cooking compartment. By doing so, you can make
energy savings of up to 20 per cent. If you preheat the
oven, you can reduce the indicated cooking times by
several minutes.
You can find information on roasts and default values
for weights in the table. If you wish to roast a heavy joint
of meat, you should definitely use a lower temperature.
If roasting several joints, use the weight of the heaviest
piece as a basis for determining the cooking time. The
individual pieces should be approximately equal in size.
As a general rule: the larger a roasting joint is, the lower
the cooking temperature and the longer the cooking
time.
Turn roasting joints and grilled items after approx.
^
to
Z
of the indicated time.
If you wish to follow one of your own recipes, you
should use similar dishes as a reference. You can find
additional information in the tips on roasting, braising
and grilling attached to the settings table.
Remove unused accessories from the cooking
compartment. This will achieve the best possible
cooking results and energy savings of up to 20 per
cent.
Summary of Contents for HBG633B.1J
Page 1: ... en Instruction manual Oven HBG633B 1J ...
Page 2: ......
