Time-setting options
en
13
Rapid heating
With Rapid heating, you can shorten the heat-up time.
Then, for best results, use:
■
<
3D hot air
Only use Rapid heating when a temperature of over
100 °C has been selected.
To achieve an even cooking result, do not place your
food into the cooking compartment until Rapid heating
is complete.
1.
Set the function selector to
F
.
2.
Use the temperature selector to set the temperature.
The oven will start heating after a few seconds.
Once Rapid heating is complete, an audible signal will
sound. Place your food in the cooking compartment.
O
Time-setting options
Time-setting options
Your appliance has different time-setting options.
Before you can call up the cooking time using the
v
button, you will need to set a heating function. Once
you have set a cooking time, the end time can be called
up.
An audible signal will sound once the cooking time or
timer duration has elapsed. You can cancel the audible
signal early by touching the
v
button.
Setting the cooking time
You can set the cooking time for your food on the
appliance. This prevents the food from accidentally
being cooked for too long, and means that you do not
have to stop what you are doing to switch off the oven.
The maximum time that can be set is 23 hours and 59
minutes. The cooking time can be set in 1-minute
increments up to one hour, and then in 5-minute
increments.
The cooking time will start at a different default value
depending on which button you touch first:
10 minutes if you touch the
A
button and 30 minutes if
you touch the
@
button.
Example in the picture: Cooking time of 45 minutes.
Details in the diagram may differ from what you see on
your appliance.
1.
Set the type of heating and temperature or setting.
2.
Touch the
v
button twice.
The cooking time
x
will be highlighted on the
display.
3.
Use the
A
or
@
button to set the cooking time.
The appliance will start heating after a few seconds. The
remaining time will count down on the display.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
@
button to
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
A
or
@
button to change the cooking
time at any time.After a few seconds, the change will be
applied.
To cancel, use the
A
button to reset the cooking time all
the way to zero. The appliance will continue heating
without a cooking time.
Time-setting option Use
x
Cooking time
Once the set cooking time has elapsed, the
appliance will automatically stop heating.
y
End time
Enter a cooking time and the required end
time. The appliance will start up automatically
so that it finishes cooking at the required time.
Q
Timer
The timer functions like an egg timer. It runs
independently of the appliance when it is
heating and does not affect the appliance.
v
Time
When no other function is running in the fore-
ground, the appliance will show you the time
of day on the display.
[
