en
Childproof lock
10
8.4 Setting the end time
You can delay the time at which the cooking time is
due to end by up to 23 hours and 59 minutes.
Notes
¡
The end time cannot be set for types of heating with
grill function.
¡
In order to achieve a good cooking result, do not
delay the end time once the appliance is already op-
erating.
¡
Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡
The type of heating and temperature or setting have
been set.
¡
A cooking time must be set.
1.
Press repeatedly until
is selected in the dis-
play.
2.
Press the or button.
a
The display shows the calculated end time.
3.
Use the or button to delay the end time.
a
After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a
Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a
When the cooking time has elapsed, a signal
sounds and the duration is at zero in the display.
4.
When the cooking time has elapsed:
‒
Press any button to end the signal prematurely.
‒
To set another cooking time, press the button.
‒
When the dish is ready, switch off the appliance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement:
is highlighted in the display.
▶
Use the or button to delay the end time.
a
The appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end time at any time.
Requirement:
is highlighted in the display.
▶
Reset the end time to the current time plus the set
cooking time using the button.
a
After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time
Once the appliance has been connected to the mains
or after a power cut, the time flashes in the display. The
time starts at "12:00". Set the current time.
Requirement:
The function selector must be set to the
off position.
1.
Use or to set the time.
2.
Press .
a
The time that is set appears in the display.
9 Childproof lock
Secure the appliance to prevent children from accident-
ally switching it on or changing the settings.
Note:
After a power cut, the childproof lock will no
longer be active.
9.1 Activating and deactivating the
childproof lock
Requirement:
The function selector must be set to the
off position.
▶
To activate the childproof lock, press and hold the
button until
appears in the display.
‒
To deactivate the childproof lock, press and hold
the button until
goes out in the display.
10 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
10.1 Cleaning agent
To avoid damaging the different surfaces of the appli-
ance, do not use unsuitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶
Do not use aggressive or abrasive cleaning agents.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners if the appliance is
still warm.
