Bosch HBC86P753W, Instruction Manual

Page: 14 / 44

14
7.
Press the n button.
Appliance operation begins. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the
0
button.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Changing the cooking time
Press the 0 button and turn the rotary selector to change the
cooking time. Press the 0 button.
Opening the oven door during cooking
Operation is suspended. The oven is paused. The
n
symbol
flashes on the status bar. Close the door and press the
n
button again. The programme will then continue.
Pausing operation
Press the n button briefly. The oven is paused. Press the n
button again to continue operation.
Cancelling operation
Press and hold the
n
button until the intervention display
appears. You can now change the settings.
Setting a later end time
See the section entitled Time-setting options , Setting a later end
time.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Note:
Always set a cooking time for each step in the series of
operations.
1.
Press the
2
button.
The button lights up. "SeriesOperations 1" appears in the
display as the heading.
2.
Select and set the desired operating mode.
3.
Press the 2 button again in order to select the second
operation in the series.
4.
Select and set the desired operating mode.
5.
Press the
2
button again in order to select the third
operation in the series.
6.
Select and set the desired operating mode.
7.
Press the
n
button.
Appliance operation begins.
The first operation in the series is shown in the display. The
cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the 0 button.
Changing the setting
Note:
Changes can only be made before operation begins.
1.
Press the
2
button until operation 1, 2 or 3 in the series
appears in the displays
2.
Set the desired operation in the series with the rotary
selector.
3.
Press the
n
button.
Appliance operation begins.
Cancelling operation
Press and hold the n button until the intervention display
appears. You can now change the settings.
Time-setting options
You can call up the time-setting options menu by pressing
the 0 button. The following functions are available:
If the oven is switched off:
■
Setting the timer
■
Setting the clock
If the oven is switched on:
■
Setting the cooking time
■
Setting a later end time
■
Setting the timer
Setting the time-setting options ­ in brief
1.
Press the 0 button to open the menu.
2.
Use the X or Y button to switch to another line and set the
time or cooking time with the rotary selector.
3.
Press the 0 button to close the menu.
A detailed description of how to adjust each individual function
is provided below.
ƒ&
7RS
ERWWRPKHDWLQJ
PLWVFKOLH‰HQ
6HULHV2SHUDWLRQV