9
Pausing operation
Press the
n
button briefly. The oven is paused.
The
n
symbol flashes. Press the
n
button again, operation
continues.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Cancelling operation
Press and hold the
n
button until “Select function” appears.
You can now change the settings.
Calling up information
Press the
°
button briefly. To view each item of information,
press the
°
button again. Before the appliance is started,
information is displayed on the types of heating, shelf positions
and accessories. After the appliance is started, you can check
the heating temperature in the cooking compartment.
Setting the cooking time
See section
Time-setting options
, setting the cooking time.
Setting a later end time
See the section entitled
Time-setting options
, Setting a later end
time.
MicroCombi, gentle/MicroCombi, intensive
For these types of heating, a microwave power setting is
automatically switched on. You simply need to set the
temperature specified in the recipe and halve the cooking time.
MicroCombi, gentle
MicroCombi, gentle is suitable for cakes in tins, such as
■
Sponge cake, e.g. marble cake, fruit loaf, fruit flan
■
Short-crust pastry with moist filling, e.g. apple pie,
cheesecake
■
Cakes made from baking mixtures
■
Yeast cake, e.g. with currants
■
For roasting, the cooking time can also be halved with this
type of heating.
Note:
Use dark metal baking tins or else plastic "FlexiForm"
bakeware. For joints, a heat-resistant glass dish with or without
a lid is suitable.
MicroCombi, intensive
This type of heating is suitable for
■
poultry, e.g. chicken
■
baked casseroles, e.g. pasta bake
■
gratins, e.g. potato gratin
■
grilled fish, fresh and frozen
Note:
Use heat-resistant containers made of glass or ceramic.
Setting procedure
If there is information in the recipe for different types of heating,
take the setting for Top/bottom heating. The cooking time
specified in the recipe should not exceed 30 minutes.
Place your dish in the cold cooking compartment. Place the
dish in the centre of the wire rack at position 1.
1.
Press the
!
button.
3D hot air, 160 °C is suggested in the display.
2.
Using the rotary selector, set the “MicroCombi, gentle” or
“MicroCombi, intensive” heating type.
3.
Use the
X
button to switch to the temperature and set the
temperature using the rotary selector.
4.
Press the
0
button and switch to cooking time by turning the
rotary selector.
5.
Press the
X
button and set the cooking time using the
rotary selector.
6.
Press the
0
button.
7.
Start with the
n
button.
You can see the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the
0
button.
Recommended settings
If you choose a dish from the recommended settings, the ideal
setting values are already specified. You can choose from
many different categories. You will find recommended settings
for a large number of dishes – from cake, bread, poultry, meat
and game through to bakes and pre-prepared products. You
can change the temperature and cooking time. The type of
heating is fixed.
You can access the various dishes by navigating through
several selection levels. Try it out and see the range of dishes
for yourself.
Selecting a dish
1.
Press the
!
button.
3D hot air, 160 °C are suggested in the display.
2.
Turn the rotary selector anticlockwise to Recommended
settings.
The first food category appears.
3.
Press the
X
button to switch to the food category and select
the required category by turning the rotary selector.
Move to the next level with the
X
button. Turn the rotary
selector to make the next selection.
The setting for the selected dish now appears. You can
change the temperature, but not the type of heating.
4.
Press the
n
button.
Appliance operation begins. The cooking time is shown
counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
00:00:00. You can cancel the signal early by pressing the
0
button.
Changing the temperature or grill setting
Turn the rotary selector to change the temperature or grill
setting.
Changing the cooking time
Press the
0
button and switch to cooking time by turning the
rotary selector. Press the
X
button and turn the rotary selector
to change the cooking time. Press the
0
button.
Calling up information
Press the
°
button.
Setting a later end time
See the section entitled
Time-setting options
, Setting a later end
time.
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
■
3D hot air
■
Hot air
■
Top/bottom heating
