13
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: top/bottom heating setting, 180 °C,
cooking time of 45 minutes
1.
Press the
0
button.
The time-setting options menu appears.
2.
Switch to the cooking time by turning the rotary selector.
3.
Press the
X
button to change line.
4.
Turn the rotary selector to set the cooking time.
5.
Press the
0
button.
The time-setting options menu closes.
6.
If the operation has not yet started, press the
n
button. You
can see the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
0
button.
Cancelling the cooking time
Press the
0
button to open the menu. Use the rotary selector
to switch to the cooking time, press the
X
button and set the
cooking time to 00:00 by turning the rotary selector. Press
the
0
button to close the menu.
Changing the cooking time
Press the
0
button to open the menu. Use the rotary selector
to switch to the cooking time, press the
X
button and change
the cooking time by turning the rotary selector. Press the
0
button to close the menu.
Setting a later end time
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
A later end time can be set for
■
all types of heating and all dishes from the recommended
settings
■
a variety of programmes
■
and for self-cleaning
Example: you put the dish in the cooking compartment at 9.30 .
It takes 45 minutes to cook and will be ready at 10.15, but you
would like it to be ready at 12.45 instead.
Change the end time from 10.15 to 12.45. The oven goes into
standby. Cooking starts at 12.00 and finishes at 12.45.
This function is also available for self-cleaning. You can shift the
time of the cleaning operation so it is carried out at night, which
means that the oven is available at all times during the day.
Setting a later end time
Prerequisite: The selected operation has not already begun and
a cooking time has been set. The
0
time-setting options menu
is open.
1.
Switch to "End" by turning the rotary selector. The end time of
the operation is displayed in the second line.
2.
Press the
X
button.
3.
Set a later end time by turning the rotary selector.
4.
Press the
0
button to close the time-setting options menu.
5.
Confirm by pressing the
n
button.
The setting is adopted. The oven is in
0
... standby. The end
time is displayed in the status bar. When cooking starts, the
cooking time is shown counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
the cooking time as 00:00:00. You can cancel the signal early
by pressing the
0
button.
Correcting the end time
This is possible, providing the oven is on standby. Press the
0
button to open the menu. Use the rotary selector to switch to
end time, press the
X
button and adjust the end time by
([LWZLWK
7LPHU
PLQVHF
7LPHVHWWLQJRSWLRQV
([LWZLWK
PLQVHF
7LPHVHWWLQJRSWLRQV
&RRNLQJWLPH
([LWZLWK
PLQVHF
7LPHVHWWLQJRSWLRQV
&RRNLQJWLPH
7LPHVHWWLQJV
&
7RSERWWRPKHDWLQJ
([LWZLWK
(QG
7LPHVHWWLQJRSWLRQV
([LWZLWK
(QG
7LPHVHWWLQJRSWLRQV
7LPHVHWWLQJRSWLRQV
7RSERWWRPKHDWLQJ
&
