en
Time-setting options
16
3.
Use the
A
or
@
button to set the cooking time.
The appliance will start heating after a few seconds. The
remaining time will count down on the display.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
@
button to
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
A
or
@
button to change the cooking
time at any time.After a few seconds, the change will be
applied.
To cancel, use the
A
button to reset the cooking time all
the way to zero. The appliance will continue heating
without a cooking time.
Checking time-setting options
If time-setting options have been set, the corresponding
symbols are lit up on the display. The symbol for which
the time is currently being displayed will be indicated.
To check the values for the different time-setting
options, touch the
v
button repeatedly until the
required symbol is indicated.
Setting the end time
You can delay the time at which cooking is due to
finish. You can, for example, put your food in the
cooking compartment in the morning and set the
cooking time so that it is ready at lunch time.
Notes
■
Make sure that food is not left in the cooking
compartment for too long as it may spoil.
■
Do not adjust the end time once the appliance is
already in operation. Otherwise the cooking result
may no longer be satisfactory.
The end of the cooking time can be delayed by up to
23 hours and 59 minutes.
Example in the picture: The time is 10.30 a.m., a
cooking time of 45 minutes has been set and you want
the food to be ready at 12.30 p.m.
1.
Set the type of heating and temperature or setting.
2.
Touch the
v
button twice and use the
A
or
@
button
to set the cooking time.
3.
Touch the
v
button again.
The end time
{
will be highlighted on the display.
4.
Use the
@
or
A
button to delay the end time.
The appliance will apply the settings after a few
seconds. The end time will be shown on the display.
Once the appliance starts, the time will begin counting
down.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
@
button to
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
A
or
@
button to change the end time.
After a few seconds, the change will be applied. The
end time cannot be changed once the cooking time has
already started to count down. Otherwise the cooking
result would no longer be satisfactory.
To cancel, use the
A
button to set the end time all the
way back to the current time plus the cooking time. The
appliance will start to heat and the cooking time will
start to count down.
