Bosch GWS 22-180 H Professional, Original Instructions Manual

Page: 19 / 303

English | 19
(15) Hand guard
A)
(16) Spacer discs
A)
(17) Rubber sanding pad
A)
(18) Abrasive disc
A)
(19) Round nut
A)
(20) Cup brush
A)
(21) Extraction guard for cutting with a guide block
A)
(22) Diamond cutting disc
A)
(23) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle grinder GWS 22-180 H GWS 22-180 JH GWS 22-230 H GWS 22-230 JH
Article number
3 601 H81 L.. 3 601 H81 M.. 3 601 H82 L.. 3 601 H82 M..
Rated power input W 2200 2200 2200 2200
Power output W 1500 1500 1500 1500
Rated speed min
-1
8500 8500 6500 6500
Max. grinding disc diameter mm 180 180 230 230
Grinding spindle thread M 14 M 14 M 14 M 14
Max. thread length of grinding spindle mm 25 25 25 25
Restart protection – ● – ●
Starting current limitation – ● – ●
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxiliary handle kg 5.1 5.1 5.3 5.3
– with standard auxiliary handle kg 5.0 5.0 5.2 5.2
Protection class / II / II / II / II
Angle grinder GWS 24-180 JH GWS 24-230 H GWS 24-230 JH GWS 26-180 JH GWS 26-230 JH
Article number 3 601 H83 M.. 3 601 H84 L.. 3 601 H84 M.. 3 601 H55 M.. 3 601 H56 M..
Rated power input W 2400 2400 2400 2600 2600
Power output W 1600 1600 1600 1700 1700
Rated speed min
-1
8500 6500 6500 8500 6500
Max. grinding disc dia-
meter mm 180 230 230 180 230
Grinding spindle
thread M 14 M 14 M 14 M 14 M 14
Max. thread length of
grinding spindle mm 25 25 25 25 25
Restart protection ● – ● ● ●
Starting current limita-
tion ● – ● ● ●
Weight according to EPTA-Procedure 01:2014
– with low-vibration
auxiliary handle
kg 5.1 5.2 5.3 6.0 6.1
– with standard auxili-
ary handle
kg 5.0 5.1 5.2 5.9 6.0
Protection class / II / II / II / II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
When switching on power tools with starting current limitation, the voltage drops briefly. Interference with other equipment may occur in the
event of unfavourable conditions in the electricity supply. Malfunctions are not expected if the impedances in the electricity supply are below
0.25 ohms.
Bosch Power Tools 1 609 92A 5C5 | (06.07.2020)