English |
9
Bosch Power Tools
1 609 92A 2HX | (14.1.16)
Technical Data
Assembly
Changing the Tool
Before any work on the machine itself, pull the mains
plug.
Wear protective gloves when changing application
tools/accessories.
Contact with the application tool/
accessory can lead to injuries.
Selecting the Application Tool/Accessory
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in the extensive Bosch acces-
sories program.
Multi-Cutter
GOP 30-28
GOP 40-30
GOP 55-36
Article number
3 601 237 0..
3 601 B31 0..
3 601 B31 1..
Preselection of orbital stroke rate
Rated power input
W
300
400
550
No-load speed n
0
min
-1
8000–20000
8000–20000
8000–20000
Oscillation angle, left/right
°
1.4
1.5
1.8
Weight according to EPTA-Procedure 01:2014
kg
1.5
1.5
1.6
Protection class
/
II
/
II
/
II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Accessory
GOP 30-28
GOP 40-30
GOP 55-36
Accessory
Material
Application
BIM segment saw
blade
Wooden materials,
Plastic,
Non-ferrous metals
Separating and plunge cuts; also for sawing close to edges,
in corners and hard to reach areas;
example: shortening already installed bottom rails or door
hinges, plunge cuts for adjusting floor panels
Base plate for sand-
ing, series Delta
93 mm
Depends on sanding sheet Sanding surfaces close to edges, in corners or hard to reach
areas;
depending on the sanding sheet for, e.g., sanding wood,
paint, varnish, stone
Fleeces for cleaning and for texturing wood, removing rust
from metal and for keying varnishes, polishing felt for pre-
polishing
Profile sander
Wood,
Pipes/Profile,
Paint,
Varnishes,
Filler,
Metal
Convenient, efficient sanding of profiles up to a diameter
of 55 mm;
Red sanding sheets for sanding wood, pipes/profiles,
varnishes, fillers and metal
OBJ_BUCH-2788-001.book Page 9 Thursday, January 14, 2016 3:19 PM