Bosch GOP Professional 30-28, Original Instructions Manual, Page: 10 / 110

10 | English
1 609 92A 2HX | (14.1.16) Bosch Power Tools
BIM plunge cut saw
blade, wood and
metal Softwood,
Soft plastics,
Plasterboard,
Thin-walled aluminium
and non-ferrous metal
profiles,
Thin sheet metals,
Non-hardened nails and
screws Smaller separating and plunge cuts;
example: cutting an opening for sockets, flush cutting a
copper pipe, plunge cuts in plasterboard
Filigree adjustment work in wood;
example: sawing openings for locks and fittings
HCS plunge cut saw
blade, wood Wooden materials,
Soft plastics Separating and deep plunge cuts; also for sawing close to
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
Bi-metal plunge cut
saw blade, hard-
wood Hardwood,
Laminated panels Plunge cuts in laminated panels or hardwood;
example: installing skylights
TC plunge cut saw
blade, metal Metal,
Severely abrasive mate-
rials,
Fibreglass,
Plasterboard,
Cement-bonded fibre
boards Plunge cuts in severely abrasive materials or metal;
example: cutting kitchen front covers, easy cutting through
hardened screws, nails and stainless steel
BIM plunge cut saw
blade, wood and
metal Softwood,
Hardwood,
Veneered panels,
Plastic-laminated panels,
Non-hardened nails and
screws Plunge cuts in laminated panels or hardwood;
example: shortening door frames, cutting openings for a
shelf
HM-Riff segment
saw blade Cement joints,
Soft wall tiles,
Glass fibre reinforced
plastics,
Porous concrete Cutting and separating close to edges, in corners or hard to
reach areas;
example: removing grouting joints between wall tiles for
repair work, cutting openings in tiles, gypsum boards or
plastic
Diamond-Riff seg-
ment saw blade Cement joints,
Soft wall tiles,
Epoxy resin,
Glass fibre reinforced
plastics Precise routing and cutting of tile/joint material, epoxy
resins and glass fibre reinforced plastics;
example: making smaller cutouts in soft wall tiles and
routing openings in glass fibre reinforced plastic
HM-Riff delta plate Mortar,
Concrete residues,
Wood,
Abrasive materials
Rasping and sanding on hard surfaces;
example: removing mortar or tile adhesive (e.g. when
replacing damaged tiles), removing carpet adhesive resi-
dues
HM-Riff grout and
mortar remover Mortar,
Joints,
Epoxy resin,
Glass fibre reinforced
plastics,
Abrasive materials Routing and cutting joint and tile material and rasping and
sanding on hard surfaces;
example: removing tile adhesive and grout
HCS multi blade Roofing felt,
Carpets,
Artificial turf,
Cardboard,
PVC flooring Fast, precise cutting of soft material and flexible abrasive
materials;
example: cutting carpets, cardboard, PVC flooring, roofing
felt, etc.
Accessory Material Application
OBJ_BUCH-2788-001.book Page 10 Thursday, January 14, 2016 3:19 PM