Bosch GCD 12 JL Professional, Original Instructions Manual

Page: 24 / 333

24 | English
(1) Locking lever
(2) Laser protection cap
(3) Spindle lock
(4) Retracting blade guard
(5) Chip box
(6) Angle guide
(7) Locking spindle
(8) Quick release
(9) Spindle handle
(10) Clamping lever of the saw table extension
(11) Saw table extension
(12) Hex key (6 mm)/cross-headed screwdriver
(13) Clamping handle for mounting the angle guide
(14) Transport safety lock
(15) Protective guard
(16) Handle
(17) On/off switch
(18) Laser warning label
(19) On/off switch for laser (cutting line indication)
(20) Transport handle
(21) Cover plate
(22) Bracket
(23) Mounting holes
(24) Chip drawer
(25) Saw table
(26) Lower fastening screw (cover plate/retracting
blade guard)
(27) Upper fastening screw (cover plate/retracting
blade guard)
(28) Guide bolt
(29) Hex socket screw for mounting the saw blade
(30) Clamping flange
(31) Saw blade
(32) Inner clamping flange
(33) Angle indicator
(34) Scale for mitre angles
(35) Set screw for laser positioning (parallelism)
(36) Screw for angle indicator
(37) Laser beam output
Technical data
Metal cut-off saw GCD 12 JL
Article number 3 601 M28 0..
Rated power input W 2000
No-load speed min
-1
1600
Laser type nm 650
mW < 0.39
Metal cut-off saw GCD 12 JL
Laser class 1M
Laser line divergence mrad (full
angle)
1.0
Weight according to EPTA-
Procedure 01:2014 kg 20
Protection class
/ II
Dimensions of suitable saw
blades
Max. saw blade diameter mm 305
Base blade thickness mm 1.8 − 2.5
Hole diameter mm 25.4
Maximum workpiece dimensions: (see "Permissible workpiece di-
mensions", page 26)
The specifications apply to a rated voltage [U] of 220 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise information
Noise emission values determined according to
EN 62841-1 .
Typically the A-weighted noise level of the power tool is:
Sound pressure level
100 dB(A); sound power level
113 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
Mounting
u
Avoid starting the power tool unintentionally. The
mains plug must not be connected to the power supply
during assembly or when carrying out any kind of
work on the power tool.
Items included
Carefully remove all parts included in the delivery from their
packaging.
Remove all packing material from the power tool and the ac-
cessories provided.
1 609 92A 7N3 | (26.04.2022) Bosch Power Tools