1 690 706 220
2016-09-14
|
Robert Bosch GmbH
Installing USB hardlock | FWA 4650 | 71
en
7.3.2
Re-connection
i
Function:
$
Monitoring of Bluetooth link
$
Re-connection of Bluetooth link
!
The "COM Re-Connect" program must be started
and configured to ensure proper, trouble-free
operation.
i
Program path:
C:\PROGRAM FILES (x86)\TOSHIBA\BLUETOOTH
TOSHIBA STACK\COMReConnect.exe
1.
Start the program file.
Fig. 58: "COM Re-Connect" program window
2.
Select Bluetooth adapter.
3.
Place a tick next to the adapter.
4.
Place a tick next to "Place Icon in the Taskbar".
The "COM Re-Connect" program is started auto-
matically on starting the computer.
Fig. 59: Program icon "COM Re-Connect" + active Bluetooth link
in task bar
The program icon appears in the task bar.
Function
Value [s]
"Interval time" = Time until re-connection
0
"Link supervision timeout" = Time after which link
interruption is to be classed as an interrupt
1
Tab. 24: "COM Re-Connect" program window settings
"
This completes starting and configuration of the
"COM Re-Connect" program.
8. Installing USB hardlock
Fig. 60: USB hardlock
i
The USB hardlock contains the licence for usage
and installation of the software for a specific device
version. There is a separate licence for each device.
!
This licence is essential for installation of the
measurement program/vehicle target data and
operation of the device.
¶
Connect the USB hardlock to the PC/ Laptop before
installing the measurement program.
i
Driver for USB hardlock:
$
The driver is included on the installation CD of
the measurement program.
$
It is installed and configured automatically during
installation of the measurement program (refer to
Installation of measurement program).
Summary of Contents for FWA 4650
Page 2: ......