1 689 989 411
2019-04-01
|
Robert Bosch GmbH
Symbols used | FSA 500 | 19
en
Attention is to be paid to these operating instructions
as well as all the technical documentation for the diag-
nostic device and the part of the tester set used!
DANGER – Risk of electric shock from ex-
cessively high measurement voltage!
The measurement of voltages in excess of
200 V using CH1 / CH2 multi measurement
cables will result in injury, heart failure or
fatal electric shocks.
¶
CH1 / CH2 multi measurement cables are
only to be used for measuring voltages up
to max. 200 V.
¶
Never use CH1 / CH2 multi measurement
cable to measure mains or similar volta-
ges.
Caution!
1.
Switch off the ignition.
2.
Connect FSA 500 to battery (B–) or engine ground.
3.
Switch on the ignition.
Caution!
1.
Switch off the ignition.
2.
Disconnect the FSA 500 from the battery (B–) or engine
ground.
DANGER – Risk of electric shock if measure-
ments are taken on motor vehicles without
battery B– cable!
Measurements taken with connecting cable
B– not connected to vehicle ground or the
battery negative terminal will result in injury,
heart failure or fatal electric shocks.
¶
Connect the FSA 500 by way of battery
B– cable to
vehicle ground or the negative
post of
the battery.
¶
Heed the following connection sequence.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
1. Symbols used
1.1
In the documentation
1.1.1
Warning notices - Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word
Probability of
occurrence
Severity of danger if inst-
ructions not observed
DANGER
Immediate
impen-
ding
danger
Death
or
severe
injury
WARNING
Possible
impending
danger
Death
or
severe
injury
CAUTION
Possible
dangerous
situation
Minor
injury
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
!
Attention
Warns about possible property damage.
i
Information
Practical hints and other
useful information.
1.
2.
Multi-step
operation
Instruction consisting of several steps.
e
One-step
operation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible inter-
mediate result.
"
Final result
There is a visible final result on com-
pletion of the instruction.
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.