Bosch FPC-500, Operation Manual

Page: 22 / 40

22 en | Operation Conventional fire panel
2019.07 | 5.1 | F.01U.172.982 Bosch Sicherheitssysteme GmbH
– Press the "Reset" key.
You remain in operating level 2.
If you accessed operating level 2 using the optional key, turn the
key back and remove it from the lock to exit operating level 2.
4.2.1 Actions
Switching between day and night mode
Press the "Day/night mode" key.
The "Day mode" LED is illuminated in day mode and
deactivated in night mode. The LCD shows
Normal
in night mode and Normal Day in day mode.
In day mode, delay times are activated in zones that are
programmed as alarm verification.
Performing a reset
RESET
Press the "Reset" key.
ACK RESET
– Press the ACK key.
The fire panel performs a reset if it is not in a
normal state.
– Press the "Reset" key.
No reset is performed.
Trigger evacuation, test alarm
Notice!
Only trigger an evacuation if you want to trigger a test alarm.
You can only trigger a test alarm when the fire panel is in the
normal state.