Bosch FLEXIDOME panoramic 5100i IR, Installation Manual, Page: 11 / 40

FLEXIDOME panoramic 5100i IR Planning information | en 11
Bosch Security Systems B.V.
Installation manual
2022-01 | V01 | F.01U.385.630
Quantity Component
1 Safety information
3 Identification labels
4.3 Preparation
Before installation, prepare and plan the installation process and materials needed.
Pre-requisites
– Remove the components from the box. Make sure that all parts are included and are not
damaged.
– The necessary material and equipment:
–
4 screws M4 or no. 7.
– Appropriate size power drill.
– Screwdriver and bit holder and TR20 bit, or use the provided TR20 Allen key.
– microSD card (optional)
4.4 Network and PoE
i
Notice!
Use only PoE IEEE 802.3at / 802.3af Type 1, Class 3 approved devices.
Power-over-Ethernet (PoE) can be connected at the same time as a 24 VAC and 12 VDC power
supply. If auxiliary power and PoE is applied simultaneously, the camera draws its power from
PoE by default, and seamlessly switches to auxiliary input if PoE fails.
When PoE returns, the camera seamlessly switches back to PoE as its default power source.
Cables
For cable requirements, refer to Wiring the camera base.