Configuration
The camera normally provides an optimal picture without the
need for further adjustments. However, you can use a web
browser via the network to access a menu to change camera
settings such as user modes, passwords, picture settings and
network settings.
Configuration options using the menu system on the camera
itself are limited to basic setup via the Wizard.
1.
Open the camera in the web browser.
2.
Click Configuration in the title bar.
3.
Select Camera >> Installer Menu from the side bar.
4.
Select the application variant before any other changes are
made, as the camera reboots automatically and resets the
factory defaults when the application variant is changed.
If required, configure the parameters in other menus to suit your
working environment (for example, ID, passwords, date and
time). Refer to the operation manuals of the software for more
information.
7
28
en | Configuration
FLEXIDOME IP starlight
6000 VR
2016.06 | v1.0 | AM18-Q0711
Bosch Security Systems
Summary of Contents for FLEXIDOME NIN-63013
Page 1: ...FLEXIDOME IP starlight 6000 VR NIN 63013 NIN 63023 en Installation Manual ...
Page 2: ......
Page 38: ......
Page 39: ......
