FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
Configuration | en
41
Bosch Security Systems B.V.
User manual
11-2022 | V02 | F.01U.394.427
Stream
Select a stream to be transmitted.
Remote port
Select an appropriate browser port depending on the network configuration.
The ports for HTTPS connections are only available if
SSL encryption
is set to
On
.
Video output
If a hardware receiver is used, select the analog video output to which the signal should be
switched. If the destination device is unknown, select
First available
. This places the image on
the first video output with no signal.
The connected monitor only displays images when an alarm is triggered.
Note:
Refer to the destination unit documentation for more information on image display options
and available video outputs.
Decoder
If a split image is set for the selected video output, select a decoder to display the alarm
image. The decoder selected determines the position in the split image.
SSL encryption
SSL encryption protects data used for establishing a connection, such as the password. By
selecting
On
, only encrypted ports are available for the
Remote port
parameter. SSL
encryption must be activated and configured on both sides of a connection.
The appropriate certificates must also have been uploaded. (Certificates can be uploaded on
the
Certificates
page.)
Configure and activate encryption for media data (such as video, metadata or audio when
available) on the
Encryption
page (encryption is only available if the appropriate license is
installed).
Audio
Select
On
to transmit the audio stream with an alarm connection.
Click
Set
to apply the changes.
4.6.2
Video Content Analysis (VCA)
The camera has integrated Video Content Analysis (VCA) which detects and analyzes changes
in the picture using image processing algorithms. Such changes can be due to movements in
the camera's field of view. Detection of movement can be used to trigger an alarm and to
transmit metadata.
Various VCA configurations can be selected and adapted to your application, as required.
Configure the VCA setting in the Bosch Configuration Manager.
4.6.3
Audio Alarm
Alarms can be generated based on audio signals. Configure signal strengths and frequency
ranges so that false alarms, for example, machine noise or background noise, are avoided.
Set up normal audio transmission before configuring the audio alarm.
Audio alarm
Select
On
for the device to generate audio alarms.
Name
The name makes it easier to identify the alarm in extensive video monitoring systems. Enter a
unique and clear name here.
