14
en | Hardware installation
FLEXIDOME IP indoor 8000i
2021-08 | 01 |
Installation manual
Bosch Security Systems B.V.
Additionally, the camera has various mounting options when combined with the available
accessories. Refer to
Mounting accessories, page 27 for the available accessories.
i
Notice!
The plugs and screws for surface mounting are not supplied with the camera.
6.1.1
Installing the mounting plate without conduit
1.
Remove the mounting plate from the box.
2.
Position the mounting plate with the center hole on top of the cable exit on the surface,
and mark the positions of the screw holes on the surface.
–
For a camera mounted on a wall: make sure that the mounting plate is oriented in a
90º angle, with the holes parallel to the floor, for proper alignment of mounting
screws and logos.
