Bosch EasyShear, Original Instructions Manual

Page: 14 / 236

14 | English
EasyShear Grass shear Shrub shear
Permitted ambient temperature during opera-
tion
A)
and storage
°C -10... +50 -10... +50
Battery Li-Ion Li-Ion
Rated voltage V 3.6 3.6
Capacity Ah 1.5 1.5
Number of battery cells 1 1
A) Limited performance at temperatures <0 °C
Charger
Article number
EU 2 609 120 713
UK 2 609 120 718
Charging current A 1.0
Charging period (battery discharged) h 3.5
Weight according to EPTA‑Procedure 01:2014 kg 0.03
A)
Protection class / II
A) country specific
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Grass shear
Measured sound values determined according to
EN 50636-2-94 .
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A).
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 50636-2-94 :
a
h
< 2.5 m/s
2
, K = 1.5 m/s
2
.
Shrub shear
Noise emission values determined according to EN
62841-4-2 .
Typically the A-weighted noise levels of the product are:
Sound pressure level
XX dB(A); sound power level
XX dB(A). Uncertainty K = = XX dB.
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 62841-4-2 :
a
h
< 2.5 m/s
2
, K = 1.5 m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Starting Operation
u
Use only the chargers listed in the technical data. Only
these battery chargers are matched to the lithium-ion bat-
tery of your product.
Battery Charging (see figure B)
Note: The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in the
battery charger before using for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.
The “Electronic Cell Protection (ECP)” protects the lithium-
ion battery against deep discharging. When the battery is
discharged, the machine is switched off by means of a pro-
tective circuit: The garden product no longer operates.
Note : The micro-USB port (11) for connection of the micro-
USB cable (9) is in the handle.
When the charger level indicator (1) lights up red, the bat-
tery must be charged. Switch the machine off and charge the
battery.
Connect the machine to the charger
(10) using the micro-
USB cable (9) . Plug the charger (10) into the socket. The
charging process begins.
F 016 L81 893 | (09.12.2019) Bosch Power Tools