48
en | Maintenance
DIVAR IP 7000 (2U)
2016.07 | V2 | DOC
Installation Manual
Bosch Sicherheitssysteme GmbH
To replace the power distributor:
1.
Turn off the unit and remove the plug from the wall socket or power strip.
2.
Remove all cable connections to the power supply from the motherboard, backplane, and
other components. Also, remove both power supplies.
3.
Locate the power distributor between the power supply and the fan row.
4.
Remove the three screws securing the power supply.
5.
Gently pull the power distributor from the chassis. Gently guide all the cables through the
power distributor housing.
6.
Slide the new power distributor module into the power distributor housing. Make that
you slide the cables through the bottom of the housing.
7.
Reconnect all the power cables, replace the power supply, and insert the plug into the
wall.
10.13
Monitoring the system
The system provides tools for health monitoring.
To activate the monitoring functionality:
1.
Turn on the unit and log on as user BVRAdmin. The default screen is displayed.
2.
Double-click the
SuperDoctor 5
service icon on the screen.
3.
Log on to the web interface using the following default credentials:
User Name: ADMIN
Password: ADMIN
4.
Click the
Configuration
tab, then click
Password Settings
and change the default
password.
5.
Click the
Configuration
tab, then click
Alert Configuration
.
6.
Activate the
SNMP Trap
feature and specify the IP address of the receiver for SNMP
traps.
10.14
Recovering the unit
Following procedure describes how to restore the factory default image.
To restore the unit to factory default image
1.
Turn on the unit and insert the system recovery DVD 1.
